About a month back I used my tie-rod end separator on my Stag project. Now I can't find it. I have a 2 year old son who plays in the garage, but I can't believe he wouldn't play with it. Can anyone p
I need to have some cylinder head work done on a Stag. Can any recommend a shop in the San Jose bay area that can work on a Stag's cylinder head? Thanks Sujit
Can anyone please tell me what type of material for O rings can be safely used on a Stag's power steering rack. The Stag's rack uses ATF transmission fluid Thanks Sujit
Hi Guys: Sorry for the non-triumph question. I have so many blunt drill bits at least 100 or so. Can anyone recommend an inexpensive drill sharpener that I can buy? I've seen some that look like a pe
Hi Guys: I'm looking for a set of side marker/ US cruise lights for a '73 stag. If you have a set or part of as set including just the housing, please let me know. In addition, I need a very early Mk
I'm looking for a cheap/free LHD vinyl dash for a "73 Stag parts car that I plan to save from the junk yard. Any condition will do as I can have it re-covered later on. I'l also looking for some US
Hi Dave: I had all the bushes changed sometime back and hadn't expected them to be warn so soon. Apparently, the after market standard Stag bushes only last a couple of years. I'll be ordering an upr
Hi Guys; I have an oil pressure gauge fitted to my '71 Stag. The oil pressure sensor has been removed. I'm interested in having both. I've been told that installing a tee is not a good idea as they c
Hi Guys: I have a rear end alignment question on a Stag, but the rear end is very similar to the TR6. No-one on the Stag list replied. Do the shims that change the toe-in and toe out of the rear whee
Are there vendors in the San Francisco, CA area that can repair or recover cracked dashes? I need a stag one done. If so, can any tell me where? Thanks Sujit
are there recommended places in the san jose, ca area who can do some sand blasting on small components at reasonable prices? better still are there places whre you can do do-it-yourself sand blastin
I have a set of distributor points that went on my mother's '73 Triumph Toledo. They are made by a company called Automotive Electrical Components CS.117 They cross reference a Lucas no. 54419946,CSI
On long journeys in my daily driver, water get pushed out of the rad and into the overflow bottle. When the car cools down, shouldn't he water return to the rad? If is doesn't can I assume the rad. c
Was any Triumph other than the Stag fitted with a Smiths clock? If so, what years? Does anyone have a photo of one from the '71 period? I'm assuming like the stag's clock they stopped working after a
The grease I cleaned out of the dizzy was so thick that I think it was preventing the centrifugal parts from moving within the distributor. What grease should I use on rebuilding? Sujit == This list