Search String: Display: Description: Sort:

Results:

References: [ +from:rkorn@europa.com: 15 ]

Total 15 documents matching your query.

1. Re: Masonite (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Tue, 14 Nov 2000 18:56:28 -0800
Masonite is a urea-phenolic-wood-chip board. You want the 1/8" double-sided-tempered grade. The stuff with the shiny-side and the matt-side is not nearly so water-resistant, hence warps easier. You c
/html/shop-talk/2000-11/msg00058.html (8,007 bytes)

2. Re: "Welding " stainless (score: 1)
Author: roger <rkorn@europa.com>
Date: Wed, 16 Aug 2000 12:28:10 -0700
"Welding" refers to joining parts with a filler that is the same, or similar to the parent metal. "Brazing" refers to joining parts with a lower melting point filler. In many situations, brazing is a
/html/shop-talk/2000-08/msg00079.html (8,505 bytes)

3. Re: auto glue to use? (score: 1)
Author: roger <rkorn@europa.com>
Date: Sat, 22 Jul 2000 12:53:18 -0700
My approach would be to find an inconspicuous spot and try tiny drops of epoxy, cyanoacrylate ("Super Glue"), ABS plumbing cement, and PVC plumbing cement. The one that atacks the material the most i
/html/shop-talk/2000-07/msg00064.html (7,954 bytes)

4. Re: Painting floors (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Tue, 05 Jan 1999 07:05:53 -0800
For cleaning, rent or borrow a big commercial steam cleaner with degreasing detergent (water base) and get about three friends with square ended shovels. Steam, scrape, steam, scrape until it's mostl
/html/shop-talk/1999-01/msg00017.html (9,749 bytes)

5. Re: Milling machines (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Wed, 02 Dec 1998 06:50:23 -0800
Probably HF for the price or Grizzly for the after-sale service and support. I haven't used their mills, but the Grizzly tools I've bought so far (table saw, shaper, dovetail jig, lathe, and jointer
/html/shop-talk/1998-12/msg00003.html (7,978 bytes)

6. Re: Homak brand toolchests? (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Thu, 22 Oct 1998 20:06:34 -0700
Measure the diameter of the holes in the feet and trip on down to Grainger's or the moral equivalent thereof. They sell shock mounts of stiff rubber that consist of a puck with studs sticking out eac
/html/shop-talk/1998-10/msg00093.html (9,209 bytes)

7. Re: Removing Engine Sludge (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Sat, 26 Sep 1998 06:30:24 -0700
I'd suggest pulling and cleaning the oil pan, replacing the pan gasket and reassembling, then flush with 75% oil and 25% kerosene. Just enough revs to get oil pressure. Run about 15 minutes and drain
/html/shop-talk/1998-09/msg00032.html (8,513 bytes)

8. Re: cutting masnoite (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Wed, 29 Jul 1998 22:23:10 -0700
There's masonite and there's tempered-two-sides masonite. Use the latter. For smooth curve cutting on 1/8" stock, use a saber saw with at least 14 teeth per inch. Some models, like the Bosch, have a
/html/shop-talk/1998-07/msg00142.html (7,896 bytes)

9. Re: Portable Generators (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Sat, 20 Jun 1998 06:59:15 -0700
Generators run unattended for long periods. If a crankshaft seal blows on a generatoryou'ld never know until too late. On a lawn mower, you'ld know! I think so. I have a Honda tiller (6 years) and a
/html/shop-talk/1998-06/msg00088.html (8,742 bytes)

10. Re: Garage Door Balance (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Mon, 23 Mar 1998 07:01:16 -0800
I will second this strategy. However, in the case of my wife (gardener, potter, graphic artist) it can be taken too far - she's adopted my strategy of "The only bad tool decisions are not buying the
/html/shop-talk/1998-03/msg00078.html (9,635 bytes)

11. Re: Got Lead? (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Tue, 24 Mar 1998 18:11:58 -0800
Brit iron is its own worst enemy. Valve seat problems rank below Lucas electrics, oil leaks, and bizarre thread standards on my list. Roger BSA Gold Star, Norton Manx (short stroke), AH100, and Morga
/html/shop-talk/1998-03/msg00114.html (7,468 bytes)

12. Re: speed control (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Mon, 19 Jan 1998 19:02:54 -0800 (PST)
It gets worse. You also need a DC motor that will run about $400 for 1hp. The prices in Grainger's are, unfortunately, hard to beat. The modern speed controls work very well - speed is practically co
/html/shop-talk/1998-01/msg00051.html (8,976 bytes)

13. Re: Drill Press (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Thu, 25 Dec 1997 11:18:35 -0800 (PST)
The problem with taper chucks is safety. I am primarily a woodworker and there are two situations that require some sort of positive attachment of chuck to quill: 1. Mortising attachments with a holl
/html/shop-talk/1997-12/msg00094.html (8,373 bytes)

14. Tools (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Fri, 24 Oct 1997 07:24:31 -0700 (PDT)
The only tool decisions that have been wrong are: 1. NOT buying a tool. 2. Buying a tool that will "Do this job" versus buying a tool that will be "The only one of these I'll need in this lifetime."
/html/shop-talk/1997-10/msg00108.html (6,765 bytes)

15. Re: Air Hammer (score: 1)
Author: Roger Korn <rkorn@europa.com>
Date: Mon, 27 Oct 1997 07:34:48 -0800 (PST)
An 8# sledge hammer is what you are looking for. 1/2 hour of moderate excercise to break it up and about 45 minutes to pick up the pieces. Go for it, Roger
/html/shop-talk/1997-10/msg00130.html (7,891 bytes)


This search system is powered by Namazu