You can find fuel caddy tanks at boating supply stores. It's not an uncommon item or need within the boating world. I do not know of one with built in tie down hooks. Not that there is a need. They s
That e-bay link looked like good replacement pieces for torsion axles. Since the trailer is light, those units will probably do just fine. Bolt/weld them on and be done with it. Full width axles can
I have the 10" sliding compound saw from HF. It's perfectly ok and reasonably accurate. No more flex in the rails than the others, and no more slop than them either. Bearings benefit from some lubri
Not sure if the Hunter 44360 will come close enough for you or not. I have this thermostat myself. The feature that may work is the "home" button. This button overrides the temperature profile and ta
Not really. And yes, deflection of the ways or tubes on a slider can be significant. And yes, in the case of the chopsaw type (non-slider) it's blade size that dictates the width of the cut. I went
Epoxy, not polyester resin. Polyester resin is the cheap, stinky, goey stuff car folk work with. Terrible stuff. Epoxy doesn't stink, isn't cheap, is a liquid, and is wonderful to work with. You'll f
If you're talking about looking at a fiberglass fender or boat or widget that was manufactured, it almost certainly was polyester. That is what is pretty well universally used in production. It's ch
Snow King engine? Those were very common some years ago on snow blowers, and are notorious for needing to have the choke on in order to run, even when warmed up. And, they surge and splutter nicely,
Usually the auger sheer pins are grade 2 bolts. You want them soft to protect the gears. _______________________________________________ Shop-talk@autox.team.net Donate: http://www.team.net/donate.ht
Sounds like a plan to me. I like the thought of the kiddie pool. Remember, the action is pretty much directional. So sections not facing the electrodes will be much slower to de-rust. Your existing b
I am far from a super well versed expert on electrolytic rust removal. I've done it, enjoyed it, have a bucket and stuff for it. When I first tried it, I used rebar, and was quite disappointed with t
Recently had to reinstall windows on my old laptop. Windows 10 was not a good idea. Not as a free upgrade when it was released, not as an upgrade now. In windows 7/8 it ran just fine. About 1 minute