- 1. RE: computing electrical loads (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Mon, 15 Nov 2004 19:50:54 -0700
- Not sure about the size of your garage of course, but when I wired up my garage at my old house, I pulled 75 amps into the garage from the main panel to a 24 breaker sub-panel with a back-fed main b
- /html/shop-talk/2004-11/msg00039.html (8,861 bytes)
- 2. RE: IR thermometer question (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Tue, 16 Nov 2004 09:16:14 -0700
- I don't have any personal experience with the Extech unit. I do know that they have a pretty good reputation. However, nowhere near the reputation of Fluke! I have a Fluke I/R DMM Probe and have fou
- /html/shop-talk/2004-11/msg00047.html (7,970 bytes)
- 3. RE: quick generator help? (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Thu, 2 Sep 2004 19:54:29 -0700
- The "rule of thumb" to convert from Tons of AC to KW is tons X 3.516 = 12.3 Kw (in this case). None of the generators you mentioned are going to carry the running current of the AC, to say nothing of
- /html/shop-talk/2004-09/msg00008.html (9,687 bytes)
- 4. RE: quick generator help?----2!!--- (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Thu, 2 Sep 2004 19:58:38 -0700
- I must have punched in a wrong number in calculating the KW load of the AC it should have been 11 Kw!!! The rest of the discussion is still valid however! Sorry about that! Jim the rest of my --Origi
- /html/shop-talk/2004-09/msg00009.html (8,998 bytes)
- 5. RE: Air Chucks and Blow Guns---etc! (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Fri, 10 Sep 2004 12:34:48 -0700
- I have a fairly large Campbel-Hausfeld compressor in my home shop with a small manifold and a ceiling mounted reel from HF. The reel is fed with a 50' very "non-flexible" blue plastic air hose that I
- /html/shop-talk/2004-09/msg00091.html (8,900 bytes)
- 6. RE: Air Chucks and Blow Guns (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Fri, 10 Sep 2004 17:27:12 -0700
- Grainger still sells them, but now they over $50.00!!! Jim Bauder Scottsdale, AZ --Original Message-- From: shop-talk-owner@autox.team.net [mailto:shop-talk-owner@autox.team.net]On Behalf Of Steve Ha
- /html/shop-talk/2004-09/msg00100.html (9,844 bytes)
- 7. Request for advice! (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Mon, 12 Jul 2004 14:48:13 -0700
- Tool Gurus, I have one of those Northern Tool air powered cartridge grease guns, and I am having problems getting any grease out of it! The cartridge is 2/3s full, it acts like it is working, but no
- /html/shop-talk/2004-07/msg00042.html (6,847 bytes)
- 8. RE: Running new gas lines & gas fireplaces (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Fri, 2 Apr 2004 11:07:38 -0700
- I won't comment on all of the construction details you have raised, as that is mostly a local building code issue! However, the easiest way to cut in to the middle of a gas pipe run, and I have done
- /html/shop-talk/2004-04/msg00006.html (10,991 bytes)
- 9. RE: Running new gas lines & gas fireplaces (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Fri, 2 Apr 2004 15:13:05 -0700
- No, unions are usually not allowed for use with gas lines! This is what you http://www.plumbingsupply.com/leftright.html Good luck, Jim Does that look like this?: http://www.mcmaster.com/param/asp/ps
- /html/shop-talk/2004-04/msg00011.html (8,252 bytes)
- 10. RE: Running new gas lines & gas fireplaces (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Fri, 2 Apr 2004 17:10:00 -0700
- You are right, but those are outside of the house and the gas company can do it but we couldn't, at least not in Walnut Creek and Cupertino, CA! I would imagine that most, if not all gas lines on the
- /html/shop-talk/2004-04/msg00014.html (8,333 bytes)
- 11. RE: Back-up home generator. (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Mon, 24 Nov 2003 20:06:20 -0700
- I am involved in standby generators, mostly large 3-phase diesel units. I have sold several Generac units and found them to be a good product. They seem to be well made and if they are maintained th
- /html/shop-talk/2003-11/msg00188.html (8,919 bytes)
- 12. RE: compressor motor starting problems----(Very Long!) (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Mon, 15 Sep 2003 16:50:40 -0700
- The intermittent starting problem you are experiencing, is caused by the very large locked rotor amps (LRA) pulled by the motor. Instantaneously, all motors will pull 5 to 7 (sometimes 10!) times th
- /html/shop-talk/2003-09/msg00097.html (9,983 bytes)
- 13. RE: plastic wrench (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Mon, 19 Jun 2006 15:29:10 -0700
- Use some duct tape or masking tape on a WRENCH, that should protect the Jim Does anyone know where to buy cheep, plastic, non-marring, open end wrenches? I need a 10mm wrench to install the stick ant
- /html/shop-talk/2006-06/msg00023.html (7,123 bytes)
- 14. Cell Phone Spam (sort of!)--Non-LBC (score: 1)
- Author: "Jim Bauder" <jimbpps@cox.net>
- Date: Mon, 11 Dec 2006 18:05:56 -0700
- I have been trying for several months to get "Premium Service (Non-Telcom)" charges removed from a family members portion of the families Cell Phone Bill. These charges appear once or twice a month
- /html/shop-talk/2006-12/msg00015.html (8,234 bytes)
This search system is powered by
Namazu