Neither do I, anymore. But I sure agree that one should trade off the value of one's time versus the value of the parts in question. Changing a brake rotor on a 2004 Hyundai? Chop it off and move on.
I like to put down masking tape where the cut will go; it helps suppress the chipping, and if you decide the layout is wrong before curring you can just pull up the strips and there's no Sharpie left
One example is the BrakeQuip BQ1025 "Tube Straightner": http://www.brakequip.com/tools_tube_straight.html Mount it in your bench vise, feed the tubing through it, and presto, straight tubing. _______
My first guess is it's a hydraulic ram pump like this: http://www.clemson.edu/irrig/Equip/ram4.htm only using air as the working fluid. _______________________________________________ Support Team.Ne
When I had a VW Jetta, the same thing happened to me. It turns out that you can fold the rear seat armrest down, go through the fabric behind it and undo the screws holding the latch in place. The VW
I see that Tractor Supply has their house-branded "JobSmart. 125 Amp Fluxcore/MIG Welder Kit" up for a Black Friday sale at $99.99. ANyone have experience with this brand? Is this a reasonable set fo
The answer depends on what you want, and what you mean by "published". If you just want a handful of books to go to Mom, Grandma and the kids, then Lulu or Amazon or a number of other places are fine
If you're a Dr. Who geek you could make a Dalek. _______________________________________________ Shop-talk@autox.team.net Donate: http://www.team.net/donate.html Suggested annual donation $12.96 Arch
Or 3. Just drill and tap the holes for the next larger bolt if there's enough Sent from my iPad screw. _______________________________________________ Shop-talk@autox.team.net Donate: http://www.team
An old friend used to say that when you got stuck, you should stop, consume some "prayer fluid" and wait for inspiration from the Gods of Home (or Auto) Repair. "Prayer Fluid" is made primarily from
--==1824110754237678390== --0000000000009e215705aabce9fc Content-Transfer-Encoding: quoted-printable Is this suitable? https://www.delcity.net/store/15A-Right-Angle-Plug/p_789340.h_789341.r_IF10= 03?
--==3510402430011098940== --00000000000037922d05bf077fdd And down the spark plug holes. I remember when I first got my Bentley T1, I was going over everything, and opened the bag with the jack and wh
--==4714495528534707397== --00000000000079140405d04b9310 Content-Transfer-Encoding: quoted-printable I think cast iron can be brazed much more easily than welded. I had it done once on an old car=E2=