- 1. Re: Vixen rear deck wood? (score: 1)
- Author: "Rolf Beuttenmuller" <rolf@octopus.inst.BNL.GOV>
- Date: Wed, 8 Dec 1999 08:46:28 -0500
- Hi Rich, You are correct about that strip of wood at the front of the fuel tank well. I went one step further I glassed in another strip against the rear of the car, I think it makes the rear a littl
- /html/tvr/1999-12/msg00002.html (7,384 bytes)
- 2. Re: Ring and Pinion Source (score: 1)
- Author: "Rolf Beuttenmuller" <rolf@octopus.inst.bnl.gov>
- Date: Fri, 1 Oct 1999 08:01:33 -0400
- Has anyone ever considered putting one of those quick change diff's the racers use into their car? It probably would be expensive but all you have to do is pop off a cover to change gear ratios. It p
- /html/tvr/1999-10/msg00000.html (6,410 bytes)
- 3. Re: Woodwork? (score: 1)
- Author: "Rolf Beuttenmuller" <rolf@octopus.inst.BNL.GOV>
- Date: Fri, 15 Oct 1999 14:30:30 -0400
- It has been a few years since I went to a Woodwork event and it is always a pleasant experience. I saw a lot of new faces this year and several old ones. As usual the organizers did a fabulous job of
- /html/tvr/1999-10/msg00006.html (8,565 bytes)
- 4. 4.55 gears (score: 1)
- Author: "Rolf Beuttenmuller" <rolf@octopus.inst.BNL.GOV>
- Date: Wed, 29 Sep 1999 16:15:12 -0400
- What are you guys doing , pulling stumps, climbing trees? I used to run 4:11's in my Vixen, and without overdrive I had no top end but boy was quick off the line. I have since gone back to the stock
- /html/tvr/1999-09/msg00013.html (6,176 bytes)
- 5. Re: 1978 3000S Door Hinges (score: 1)
- Author: Rolf Beuttenmuller <rolf@octopus.inst.BNL.GOV>
- Date: Tue, 17 Aug 1999 07:45:40 -0400
- When I rebuilt my hinges I also put a groove on the inside of the hole and put a grease fitting on the hinge. I used a broach to cut the groove (one of my many hats entails managing a machine shop.)
- /html/tvr/1999-08/msg00005.html (7,516 bytes)
- 6. Re: carbs (score: 1)
- Author: Rolf Beuttenmuller <rolf@octopus.inst.BNL.GOV>
- Date: Wed, 18 Aug 1999 07:40:09 -0400
- AHH sell the wife and kids and put on the webers. Rolf 70 Vixen
- /html/tvr/1999-08/msg00011.html (6,427 bytes)
- 7. Re: murky clutch fluid (score: 1)
- Author: Rolf Beuttenmuller <rolf@octopus.inst.BNL.GOV>
- Date: Thu, 01 Apr 1999 08:14:34 -0500
- Hi Richard, I had the same problem with my Vixen ( 1600 Ford) I ended up having to drop the transmission and bell housing to break the clutch free from the flywheel. After that incident I used to sta
- /html/tvr/1999-04/msg00001.html (7,291 bytes)
- 8. Re: Vixen frame specs?? (score: 1)
- Author: Rolf Beuttenmuller <rolf@octopus.inst.BNL.GOV>
- Date: Tue, 06 Apr 1999 10:03:20 -0400
- I have replaced a couple of small diameter sections under the seating area. It had a very thick wall. I don't believe that the main frame sections are as thick. Rolf rolf@bnl.gov
- /html/tvr/1999-04/msg00004.html (6,867 bytes)
This search system is powered by
Namazu