Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*wheel\s+bearings\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*wheel\s+bearings\s*$/: 26 ]

Total 26 documents matching your query.

21. Re: wheel bearings (score: 1): Author: "Tim Hutchisen" <hakhutch@adelphia.net>; Date: Fri, 8 Apr 2005 17:28:31 -0400; ScionsIf the inner seal of the bearing is felt, soak the feltseal in motor oil overnight prior to installation. This will give a much more accurate adjustment and will be less likely to loosen the wh; /html/triumphs/2005-04/msg00208.html (8,360 bytes)
22. RE: wheel bearings (score: 1): Author: "Randall" <tr3driver@comcast.net>; Date: Fri, 8 Apr 2005 14:44:43 -0700; Perhaps, but it's also much more likely to drip oil onto the braking surfaces. The 10ftlb of torque given in the manual is plenty to compress the felt. Randall; /html/triumphs/2005-04/msg00209.html (7,546 bytes)
23. Re: wheel bearings (score: 1): Author: AMfoto1@aol.com; Date: Fri, 8 Apr 2005 21:03:18 EDT; Hi Ronnie, Reading your question, one thing occured to me... Have you ever replaced the felt grease seals at the back of the hub? I ask because all of them that I've seen coming from the major TR ven; /html/triumphs/2005-04/msg00217.html (8,171 bytes)
24. RE: wheel bearings (score: 1): Author: "Hugh Barber" <tr6nut@sbcglobal.net>; Date: Fri, 8 Apr 2005 21:42:18 -0700; ... Have you ever replaced the felt grease seals at the back of the hub? I ask because all of them that I've seen coming from the major TR vendors are about twice as thick as they should be. Used as; /html/triumphs/2005-04/msg00223.html (8,028 bytes)
25. Re: wheel bearings (score: 1): Author: Michael Porter <portermd@zianet.com>; Date: Fri, 08 Apr 2005 23:14:18 -0600; This may be the suggestion from the manual, but that method works only if the bearing races are completely and fully seated. For a long time, whenever doing a rebuild of the front bearing, I've used; /html/triumphs/2005-04/msg00226.html (8,528 bytes)
26. Re: wheel bearings (score: 1): Author: TeriAnn Wakeman <twakeman@razzolink.com>; Date: Sat, 09 Apr 2005 07:12:41 -0700; Unless you are running front drum brakes, don't forget the method in the manual was found to be wrong and superseded by a factory service bulletin in Oct. '56. So if you set disk brakes up by the fa; /html/triumphs/2005-04/msg00227.html (7,577 bytes)

Current List: 21 - 26
Page: [1] [2]