- 1. Carbon Canister Rebuild (score: 1)
- Author: Unknown
- Date: Sun, 10 Nov 2002 10:38:20 -0500
- Convinced that it must be so in order to run right, I am continuing my effort to get the crankcase breather/vapor recovery set up correctly on my 72 TR6. I pulled the carbon canister apart the other
- /html/triumphs/2002-11/msg00297.html (7,627 bytes)
- 2. Re: Carbon Canister Rebuild (score: 1)
- Author: Unknown
- Date: Sun, 10 Nov 2002 10:54:39 EST
- Hugh, I replaced the carbon in the canister with activated charcoal from a pet store. I have tropical fish and even through it looks good, it absorbs the "bad stuff". If it is the orginal stuff, it i
- /html/triumphs/2002-11/msg00301.html (7,075 bytes)
- 3. Carbon Canister Rebuild (score: 1)
- Author: Unknown
- Date: Sun, 10 Nov 2002 10:59:11 -0500
- Message text written by Hugh Fader replace it with aquarium filter charcoal. Don't want to do this if I don't have to. 2. There is a fiber air filter at the bottom of the canister. It is a bit dusty
- /html/triumphs/2002-11/msg00302.html (7,539 bytes)
- 4. Re: Carbon Canister Rebuild (score: 1)
- Author: Unknown
- Date: Sun, 10 Nov 2002 11:04:00 -0500
- hI hUGH, The canister was an easy rebuild. Just as you observed the replacements parts are the fiberglass like filter and the charcoal. I used new charcoal from my local pet supply used in fish tanks
- /html/triumphs/2002-11/msg00303.html (7,850 bytes)
- 5. Re: Carbon Canister Rebuild (score: 1)
- Author: Unknown
- Date: Sun, 10 Nov 2002 08:24:17 -0900
- I took this canister apart last winter as I replaced all rubber and gaskets on my 75. I cleaned the mesh filter and let it dry and washed the charcoal section and air dried it also. I let these part
- /html/triumphs/2002-11/msg00306.html (8,636 bytes)
This search system is powered by
Namazu