Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TR\]\s+TR4\s+Horns\s+not\s+working\.\s+I\s+need\s+a\s+suggestion\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TR\]\s+TR4\s+Horns\s+not\s+working\.\s+I\s+need\s+a\s+suggestion\s*$/: 6 ]

Total 6 documents matching your query.

1. [TR] TR4 Horns not working. I need a suggestion (score: 1): Author: "Daehler, William F" <william.f.daehler@delphi.com>; Date: Wed, 11 Jul 2012 19:29:28 +0000; My horns have stopped working. They had working fine when I put in the new wiring harness five years ago. I started troubleshooting last night, and found that I do have 12 V going to the one terminal; /html/triumphs/2012-07/msg00123.html (12,675 bytes)
2. Re: [TR] TR4 Horns not working. I need a suggestion (score: 1): Author: Randy and Valerie DeRuiter <deruiterville@hotmail.com>; Date: Wed, 11 Jul 2012 16:18:43 -0500; Hi Will Take a look at a TR4 wiring diagram if you have one handy - the horns do ground through the horn button - eventually via the steering column/steering rack. If you want to keep experimenting,; /html/triumphs/2012-07/msg00124.html (11,835 bytes)
3. Re: [TR] TR4 Horns not working. I need a suggestion (score: 1): Author: "Randall" <tr3driver@ca.rr.com>; Date: Wed, 11 Jul 2012 14:55:55 -0700; What you have is more of a "long" than a short. A broken wire or bad contact, somewhere. My next step would be to check at the horn button again, with a jumper across the contacts (ie terminal to st; /html/triumphs/2012-07/msg00125.html (11,942 bytes)
4. Re: [TR] TR4 Horns not working. I need a suggestion (score: 1): Author: "Greg Gelhar" <greg@gelhar.com>; Date: Wed, 11 Jul 2012 19:18:58 -0500; It is not that both sides of your horn are going plus 12 volts, you are just reading through the horns windings. You know the problem. Your not getting a switched ground from the horn button. The hor; /html/triumphs/2012-07/msg00126.html (13,045 bytes)
5. Re: [TR] TR4 Horns not working. I need a suggestion (score: 1): Author: Keith Stewart <keithstewart@execulink.com>; Date: Thu, 12 Jul 2012 17:41:35 -0400; connection and on the TR4, there are two of those couplings and therefore two of those ground straps passing around/through those rubber couplings. Keith R. Stewart London, Ontario E-Mail: keithstewa; /html/triumphs/2012-07/msg00127.html (11,260 bytes)
6. Re: [TR] TR4 Horns not working. I need a suggestion (score: 1): Author: Randy and Valerie DeRuiter <deruiterville@hotmail.com>; Date: Fri, 13 Jul 2012 07:29:50 -0500; Uncommon I suspect, but you can actually lose ground within the column itself, right at the spline connection probably from corrosion - that is the problem on my car, I got around it temporarily by; /html/triumphs/2012-07/msg00132.html (11,765 bytes)

Current List: 1 - 6
Page: [1]