Moss recalled their " Classic Gold" made in China model, definately not a Girling. I had a C.G. unit that wouldn't hold pressure right out of the box. So four years sounds pretty good. It should stil
I use a straight pick and tape the barrel to it with masking tape or electrical tape. I use 1 or two flat blade screw drivers to hold the plastic piece down and put the barrel in place with the pick.
I would order new brake springs since you've got it apart. They aren't that expensive. Yours could be up to 40 years old, I have seen them snap. Better to be on the safe side. Al
Very sad to hear about Fred. One of my highlights of TRF summer party was to be in the back shop having coffee and donuts with Fred and Tom in the morning and listening to Freds tales. He'll be misse
It should run over the top of the tranny to the passenger side. They had a circle clip that held on the tranny and then it was a stright shot to the right angle drive. Al
I don't know about TR3, but the TR6 footwell carpet was glued to a fiber type board and then screw to the wall. How was the one you took out attached? Al
About 5 years ago I had some alloy a/c adapters made up. I've had some inquiries if I still had some, but they've been long gone. If theres any interest, theres a possibility I can get some remade. I