Search String: Display: Description: Sort:

Results:

References: [ +from:mini@nashvilletn.org: 57 ]

Total 57 documents matching your query.

1. Pesky Valve Cover Seal TR4A (score: 1)
Author: "Mark Endicott" <mini@nashvilletn.org>
Date: Mon, 6 Mar 2006 11:03:46 -0600
I have been fighting a pesky valve cover oil leak. I have one of the Triumph-Tune cast covers that just won't seal at the back of the head. I have used the conventional cork gasket glued to the cover
/html/triumphs/2006-03/msg00196.html (7,939 bytes)

2. TR4A Front Suspension (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Tue, 7 Mar 2006 17:13:28 -0600
UPS delivered a set of polly upper wishbone bushings today. Is there a reason that I can't just put the frame up on stands. Put a jack under the spring pans compressing the springs a litte and remove
/html/triumphs/2006-03/msg00235.html (7,318 bytes)

3. Fuel Pump AGAIN! (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Fri, 2 Dec 2005 08:49:06 -0600
Getting ready to replace the mechanical pump on my TR4A and I found this low pressure electric pump at Pegasus Racing. 1.25 to 1.75 PSI at 20 GPH, anybody see a reason that it won't work with a pair
/html/triumphs/2005-12/msg00015.html (7,555 bytes)

4. Re: Fuel Pump AGAIN! (score: 1)
Author: "Mark Endicott" <mini@nashvilletn.org>
Date: Fri, 2 Dec 2005 10:17:49 -0600
So Ed, is that a yes or no? 1st - Listers, Mark and I have been friends for DECADES<G>!! Mark, have you LOST your mind???? <<$86.99 >>!!!! After K.I.S.S. comps N.A.P.A.!!!!<VBG> The Pep Boys, Auto-Zo
/html/triumphs/2005-12/msg00017.html (7,718 bytes)

5. Wheel Spacer Drawing (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Thu, 8 Dec 2005 20:14:19 -0600
Sometime back someone posted a simple drawing for wheel spacers for a TR, I know it is on my computer somewhere but I can't find it. Can anyone point me to the web site? Mark Nashville == This list s
/html/triumphs/2005-12/msg00159.html (6,430 bytes)

6. Triumph front wheel part numbers (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Sun, 11 Dec 2005 16:23:04 -0600
TRIUMPH FRONT WHEEL - 1976-1953 - TR2, TR3/3A, TR4/4A, TR5, TR6 Seal (Inner) 4809911 Cone (Inner) 07100S1 Cup (Inner) 07210X1 Cone (Outer) 030621 Cup (Outer) 031621 == This list supported in part by
/html/triumphs/2005-12/msg00232.html (6,618 bytes)

7. Wire Wheel ID (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Wed, 21 Dec 2005 22:09:37 -0600
My TR4A has painted wire wheels that I don't believe are originals. How can I tell if they are Dayton or Dunlop's? Thanks, Mark == This list supported in part by The Vintage Triumph Register == http:
/html/triumphs/2005-12/msg00600.html (6,435 bytes)

8. Re: Valve Adjustment (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Thu, 22 Dec 2005 20:09:05 -0600
For crying out loud Randall, don't you even think we could install our own "Randall Filter"???? :) Merry Christmas Mark Nashville == This list supported in part by The Vintage Triumph Register == htt
/html/triumphs/2005-12/msg00624.html (7,917 bytes)

9. HS6 Carb Needle Problem, Can't get them out! (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Thu, 4 Aug 2005 19:45:05 -0500
Hey good folks, I have been having a problem with a lean mixture and decided to give "rich" needles a try. I have the pistons out of the carbs and the set screws out but the needles won't move. I hav
/html/triumphs/2005-08/msg00172.html (7,074 bytes)

10. Re: HS6 Carb Needle Problem, Can't get them out! Got them out (score: 1)
Author: "Mark Endicott" <mini@nashvilletn.org>
Date: Fri, 5 Aug 2005 10:01:58 -0500
Thanks everybody, I finally got the needles out last night. I put the needle in a vice and was able to tap them in and out with a plastic mallet. I put a little PB Blaster in the hole which seemed to
/html/triumphs/2005-08/msg00186.html (6,859 bytes)

11. Re: Battery Charger Packaging - TR3 (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Sun, 21 Aug 2005 12:42:32 -0500
Hey Chuck, Most of us like girls too!!! :) Mark Nashville http://www.nashvilletn.org/TR4/
/html/triumphs/2005-08/msg00765.html (7,419 bytes)

12. Re: Old Men! (score: 1)
Author: "Mark Endicott" <mini@nashvilletn.org>
Date: Fri, 26 Aug 2005 13:14:33 -0500
Mark Nashville I am rapidly appproching my 50th birthday, I don't think that I look so bad or that I'm in bad health. I hope all you guys can live as long as me and look and feel as good. I'm glad I
/html/triumphs/2005-08/msg00927.html (6,610 bytes)

13. Re: TR4 flat fan: parts flying off? (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Mon, 29 Aug 2005 21:52:20 -0500
Speaking of fans, I just purchased a yellow fan and a short extension from a list member with the thought of bolting it on this weekend. It looks like the radiator will need to come out to make room
/html/triumphs/2005-08/msg01083.html (7,564 bytes)

14. Re: tr3 alternator (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Fri, 15 Jul 2005 20:17:02 -0500
I just put a Delco 10SI on my TR4, let me know if you want details. Mark Nashville
/html/triumphs/2005-07/msg00342.html (6,707 bytes)

15. Alternator ARG!! (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Wed, 1 Jun 2005 19:15:52 -0500
It's me again, Thought I would install the alternator tonight and ran into a few little mechanical problems. First of all the generator bracket had been filed, drilled, and beat with a hammer until t
/html/triumphs/2005-06/msg00038.html (7,381 bytes)

16. Re: TR6 Valve spring compressing method? (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Sat, 4 Jun 2005 15:00:52 -0500
I haven't done it on the TR4 yet but on my Healer 4 cylinder here is what I did. I removed the rocker assembly. Then I drilled a piece of steel channel that would fit over the rocker studs and exten
/html/triumphs/2005-06/msg00095.html (8,078 bytes)

17. Re: Wire wheel studs (score: 1)
Author: "Mark Endicott" <mini@nashvilletn.org>
Date: Mon, 13 Jun 2005 12:49:01 -0500
Funny how those with steel/aluminium wheels want wires and those of us with wires want aluminum wheels. I am in the category of changing to Superlites (from wires) and this spacer idea sounds good to
/html/triumphs/2005-06/msg00318.html (11,493 bytes)

18. Re: Speedometer accuracy. (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Tue, 21 Jun 2005 09:09:55 -0500
There is an easier way...Just set your GPS on the dash and go for a drive. Bring masking tape in small strips and put marks on your speedo that correspond to your actual speed. Mark
/html/triumphs/2005-06/msg00597.html (7,417 bytes)

19. Wheels (score: 1)
Author: "Mark" <mini@nashvilletn.org>
Date: Sun, 1 May 2005 08:50:34 -0500
I am still chasing details of the Konig wheel deal. I have looked high and low and can't seem to find the specifications of TR4 wheels. I need bolt spacing and offset. Help appreciated. Mark
/html/triumphs/2005-05/msg00004.html (6,280 bytes)

20. Re: floor jacks (score: 1)
Author: "Mark Endicott" <mini@nashvilletn.org>
Date: Wed, 11 May 2005 13:55:35 -0500
My Kids gave me a Craftsman aluminum "racing" floor jack for Christmas that is GREAT! It will go under my TR4 with a little room to spare and three pumps and it is off the ground. Mark
/html/triumphs/2005-05/msg00282.html (7,859 bytes)

Current List: 1 - 20
Page: [1] [2] [3]
This search system is powered by Namazu