Mail Archive Search: <+from:kate>

Results:

References: [ +from:kate: 511 ]

Total 511 documents matching your query.

361. Re: [Spridgets] valve guides (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Fri, 24 Aug 2007 14:13:29 -0700; Treat the 1316 casting just the same as the 12G940. You can block of the air holes with 1/8 27 NPT allen plugs. Your machinist can tell you if the guides are worn, he should have specs for how much; /html/spridgets/2007-08/msg00472.html (7,142 bytes)
362. Re: [Spridgets] valve guides (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Sat, 25 Aug 2007 11:08:12 -0700; Missed the post that this is a response to, but.... The tap that I used to chase the threads on the air holes on my 12G1316 head is clearly marked 1/8-27 NPT. Much bigger in diameter than 1/8". Hal -; /html/spridgets/2007-08/msg00485.html (7,767 bytes)
363. Re: [Spridgets] valve guides (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Sat, 25 Aug 2007 11:20:21 -0700; Oh yes, "drill size 21/64". Pipe threads are bizzare. Hal --Original Message-- From: spridgets-bounces+hal=katemuir.com@autox.team.net [mailto:spridgets-bounces+hal=katemuir.com@autox.team.net]On Beh; /html/spridgets/2007-08/msg00486.html (8,098 bytes)
364. Re: [Spridgets] valve guides (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Sun, 26 Aug 2007 19:52:39 -0700; This never showed up on the list, so here it is again. Hal Oh yes, "drill size 21/64". Pipe threads are bizzare. Hal --Original Message-- From: spridgets-bounces+hal=katemuir.com@autox.team.net [mail; /html/spridgets/2007-08/msg00512.html (8,618 bytes)
365. [Spridgets] Compression ratio. CAUTION: LBC content. (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Thu, 30 Aug 2007 16:23:29 -0700; O.K. I'm just about at that point where I have to decide where to set the CR on my 1275 project. Motor specs as follows: 20 thou over, valves 1.401 intake and 1.212 ex. SPVP3 cam with 1.5:1 rockers.; /html/spridgets/2007-08/msg00785.html (7,396 bytes)
366. [Spridgets] AUSTIN HEALEY Bugeye hardtop - $1400 (los gatos) (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Sun, 2 Sep 2007 00:39:43 -0700; Bugeye hardtop on sf bay craigs list , NFI, etc ( wish I could afford it!) Hal [Hal Faulkner] --Original Message-- From: hal@katemuir.com [mailto:hal@katemuir.com] Sent: Sunday, September 02, 2007 12; /html/spridgets/2007-09/msg00036.html (7,795 bytes)
367. Re: [Spridgets] Rear wheel bearings?? (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Sun, 16 Sep 2007 21:22:01 -0700; Get from PPP, PA or Just Ed. They will not steer you wrong. Hal Edit your replies http://www.team.net/archive http://autox.team.net/mailman/listinfo/spridgets; /html/spridgets/2007-09/msg00372.html (6,969 bytes)
368. [Spridgets] Pick-n-pull score (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Thu, 20 Sep 2007 18:02:56 -0700; Went to the pick-n-pull on Tuesday to look at the Midget that Glen mentioned. And, as I simply can't afford to do a 5 speed conversion, was pleased to note that the tranny was still there. Didn't hav; /html/spridgets/2007-09/msg00457.html (7,620 bytes)
369. Re: [Spridgets] Which Bushings? (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Mon, 24 Sep 2007 20:11:21 -0700; At the Buster Cluster I did a front end job on FROG AYE (with the able help from several attendees that couldn't find space around Buster's car. I had Noltec bushings which had been discussed on the; /html/spridgets/2007-09/msg00631.html (8,905 bytes)
370. Re: [Spridgets] Ampco Top Cylinder Lubricator (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Tue, 25 Sep 2007 09:15:22 -0700; Since one of the reasons we want valve guide seals on our intake valves is to help reduce the oil contamination of the intake charge (which contamination REDUCES octane, thus requiring retarded spark; /html/spridgets/2007-09/msg00638.html (7,815 bytes)
371. [Spridgets] Diffy question (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Wed, 26 Sep 2007 14:50:30 -0700; Spent a good portion of the morning cleaning up my p-n-p 3.9 differential. There appears to be some drag in the pinion shaft. It kind of sticks and then makes a bit of a scraping sound when I turn it; /html/spridgets/2007-09/msg00711.html (7,459 bytes)
372. [Spridgets] What's wrong with this picture? (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Sun, 7 Oct 2007 14:53:12 -0700; Hint, read what it is they are trying to sell you, then click details button and read the fine print. http://tinyurl.com/35fnjx Hal _______________________________________________ Edit your replies h; /html/spridgets/2007-10/msg00183.html (7,970 bytes)
373. Re: [Spridgets] Front suspension question (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Mon, 8 Oct 2007 09:06:06 -0700; The play in the upper trunion is adjusted by means of shims. PPP can provide and also knows how to adjust this. They are not expensive, very inexpensive in fact. Play anywhere in the front end will; /html/spridgets/2007-10/msg00224.html (7,186 bytes)
374. Re: [Spridgets] double post (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Thu, 11 Oct 2007 22:52:18 -0700; This post was worthy of jay. Hal "We probably covered that yesterday but you didn't get it yet." _______________________________________________ Edit your replies http://www.team.net/archive http://; /html/spridgets/2007-10/msg00335.html (7,934 bytes)
375. [Spridgets] Now here's one Frank can really make a difference on!! (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Fri, 12 Oct 2007 16:46:52 -0700; or http://tinyurl.com/39s9p7 My guess is about 2 weeks 'cuz he's going to have to make some parts! Hal _______________________________________________ Edit your replies http://www.team.net/archive h; /html/spridgets/2007-10/msg00357.html (6,774 bytes)
376. [Spridgets] Differential bearing preload question (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Sun, 14 Oct 2007 22:41:50 -0700; While we're on the subject of bearing preload for tapered bearings... Has anyone ever set the preload on a spridget differential? The bearings in my p-n-p 3.9 were a bit rough so I disassembled and c; /html/spridgets/2007-10/msg00404.html (7,633 bytes)
377. Re: [Spridgets] Differential bearing preload question (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Mon, 15 Oct 2007 17:35:07 -0700; The manual clearly states " lb-in." YIKES!!! So, if I torque the pinion nut to the recommended 135 to 140 lb-ft it is definitely too tight. Now I can back off the pinion nut 'till I have 11-13 lb-in; /html/spridgets/2007-10/msg00438.html (8,415 bytes)
378. Re: [Spridgets] 1098 1.75 vs 2 main bearings (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Thu, 18 Oct 2007 09:24:21 -0700; engine number tells the tale: 10CC is 2" mains, 10CG is 1.75. Hal _______________________________________________ Edit your replies http://www.team.net/archive http://autox.team.net/mailman/listinfo; /html/spridgets/2007-10/msg00484.html (7,200 bytes)
379. [Spridgets] Crackhead in Roseville CA with 1961 Austin Healey (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Sat, 20 Oct 2007 09:31:14 -0700; http://tinyurl.com/22w265 "no evidence of rust" . . "he floorboards have rusted through on both sides especially the driver s side _______________________________________________ Edit your replies h; /html/spridgets/2007-10/msg00532.html (6,911 bytes)
380. Re: [Spridgets] Team Sprite Bugeye for Sale on Ebay (score: 1): Author: "Hal Faulkner" <hal@katemuir.com>; Date: Mon, 22 Oct 2007 16:27:46 -0700; And the red "AH" logo on the hub caps. Mike MacLean wrote: "Not to mention the incorrect windshield for a 58." Or the circumcised overflow pipes on the SU's. (Of course, cutting the excess off was on; /html/spridgets/2007-10/msg00588.html (7,224 bytes)

Current List: 361 - 380
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20]