- 1. sticky clutch? (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Thu, 29 Jul 2004 14:05:58 -1000
- Hi there, I have just put a new rear end in after thrashing my old one over some simple loose nuts = / live and learn. before the rear end let go, I was having trouble with the clutch on the release/
- /html/spitfires/2004-07/msg00168.html (7,790 bytes)
- 2. parts are all here :) (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Mon, 05 Apr 2004 12:51:05 -1000
- So yep I have everything I will need for this to begin, and it has :) I'm a happy camper. I ended up taking off the head because the one on my other engine is so nice and clean and recently was rebui
- /html/spitfires/2004-04/msg00050.html (7,398 bytes)
- 3. (No Subject) (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Fri, 09 Apr 2004 19:44:07 -1000
- Ok well I'm hoping the lack of advise from my last note, was due to the fact everything is as should be? thanks, Todd. ____________________________________________________________ Find what you are l
- /html/spitfires/2004-04/msg00106.html (7,095 bytes)
- 4. (No Subject) (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Wed, 28 Apr 2004 18:56:46 -1000
- hey can anyone tell me on the later model oil pressure sensor that screws into the block... what color wires go to which prong? they form a pyramid right? so from the top to bottom left to bottom rig
- /html/spitfires/2004-04/msg00323.html (6,847 bytes)
- 5. bottom end jiggle (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Wed, 10 Mar 2004 20:36:47 -1000
- Hi well anyone who remembers me I feel bad as I've forgotten the names of most who have helped me in the past, nothing personal I just have an aweful memory for faces and names. Here is where I'm at,
- /html/spitfires/2004-03/msg00044.html (8,213 bytes)
- 6. bottom end question 1500 (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Wed, 10 Mar 2004 20:37:16 -1000
- Hi well anyone who remembers me I feel bad as I've forgotten the names of most who have helped me in the past, nothing personal I just have an aweful memory for faces and names. Here is where I'm at,
- /html/spitfires/2004-03/msg00045.html (8,067 bytes)
- 7. bottom end questions (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Mon, 15 Mar 2004 23:20:31 -1000
- ok so I have the crankshaft out of the new engine since one of the journals was trashed and the others were worn. So this is all pretty new to me, I want to be sure do this right, I have a good manua
- /html/spitfires/2004-03/msg00079.html (8,374 bytes)
- 8. spitfire bottom end rebuild (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Wed, 24 Mar 2004 20:11:17 -1000
- Hi everyone, So here I am waiting for the crank to come back from the machine shop, I won't know what size bearings to get till then, but my question is simply this, I know vandervells are the best b
- /html/spitfires/2004-03/msg00145.html (7,888 bytes)
- 9. Re: spitfire bottom end rebuild (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Fri, 26 Mar 2004 13:08:11 -1000
- hi again yeah I have a set of mis sized county bearings from awhile back, is county the same as king? and would everyone agree these are the best substitute for the "good vandervells" ?? thanks, Todd
- /html/spitfires/2004-03/msg00191.html (7,802 bytes)
- 10. on the note of bearings... (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Fri, 26 Mar 2004 14:27:07 -1000
- howabout beck and arnley bearings? anyone heard anything good or bad about thanks, todd ____________________________________________________________ Find what you are looking for with the Lycos Yello
- /html/spitfires/2004-03/msg00193.html (6,799 bytes)
- 11. still on bearings (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Sun, 28 Mar 2004 11:53:32 -1000
- so here is where I stand ... I have a reground crankshaft, I have found One pair of VP2 30 over rodbearings for a sudo reasonable price, and I know where to get the mains but I do not consider the pr
- /html/spitfires/2004-03/msg00208.html (8,335 bytes)
- 12. and then we go to bolts.. (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Wed, 31 Mar 2004 07:45:07 -1000
- So I have ordered a set of connecting rod bolts from spitbits, I wanted to go with arp's, but the price set of a signal in my brain reminding me, I will rebuilding the old engine soon, and that is th
- /html/spitfires/2004-03/msg00243.html (7,279 bytes)
- 13. 1500 mkIV spit engine (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Fri, 06 Feb 2004 17:06:31 -1000
- well thanks for all that responded, unfortunately none of you are in my neck of the woods :( however I am just starting a second job, so I will have a little bit more money just in case some of you w
- /html/spitfires/2004-02/msg00061.html (7,062 bytes)
- 14. needed, good reliable 1500 spit engine (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Mon, 19 Jan 2004 08:27:34 -1000
- hi there, I've been on this list befroe but haven't vivsted for some time because quite frankly AOL SUCKS: P but that's anoither thing all together, I'll try to make this shoort and brief, cause this
- /html/spitfires/2004-01/msg00107.html (8,014 bytes)
- 15. still wishin and waiting and hopin for a spit engine (score: 1)
- Author: "Todd france" <triumphspitfire74@lycos.com>
- Date: Tue, 27 Jan 2004 19:51:26 -1000
- Still trying to get my hands on a good used 1500 mkIV spit engine I'm going crazy trying to find one, anyone have one or know where to find one? I'm not looking for a hand out, just a good deal or a
- /html/spitfires/2004-01/msg00167.html (7,384 bytes)
This search system is powered by
Namazu