- 1. Checkbook restoration in Dallas (score: 1)
- Author: "Pat and Kammy Willems" <pwillems@cyberramp.net>
- Date: Fri, 5 Mar 1999 22:04:19 -0600
- I have been off this list for a long time and just recently resubscribed to ask a question and some advice. I am considering hiring someone in the Dallas area to get my Spit in running shape. It is a
- /html/spitfires/1999-03/msg00118.html (8,341 bytes)
- 2. Re: Checkbook restoration in Dallas (score: 1)
- Author: "Pat and Kammy Willems" <pwillems@cyberramp.net>
- Date: Mon, 8 Mar 1999 20:27:11 -0600
- Thanks for the input. I found out the movers will put it on the truck so I will take it with me. Again, thanks. Pat '72 Spit Mk IV
- /html/spitfires/1999-03/msg00155.html (6,658 bytes)
- 3. Re: cutting out floorpans (score: 1)
- Author: "Pat and Kammy Willems" <pwillems@cyberramp.net>
- Date: Thu, 1 Oct 1998 19:08:21 -0500
- You have already gotten some replies. I will add my $0.02 if that is OK. This may be obvious but I will state it anyway-- I recommend you do one side at a time and also make sure you have the door o
- /html/spitfires/1998-10/msg00022.html (8,596 bytes)
- 4. Eastwood Spot Weld Cutter (score: 1)
- Author: "Pat and Kammy Willems" <pwillems@cyberramp.net>
- Date: Sat, 3 Oct 1998 08:03:22 -0500
- I replied: I tried out the other cutter and I find that it works better than the cutter with the center guide. Much less frustrating and works just as fast. Pat '72 Spit Mk IV
- /html/spitfires/1998-10/msg00045.html (7,572 bytes)
- 5. Re: cutting out floorpans (score: 1)
- Author: "Pat and Kammy Willems" <pwillems@cyberramp.net>
- Date: Tue, 6 Oct 1998 22:04:40 -0500
- Order a catalog from http://www.eastwoodco.com/index.html My copy of the catalog shows P/N Desc Price 19017 3/8" Professional Spot Weld Cutter $17.99 19068 Spot Weld Cutter Assy (has center guide pin
- /html/spitfires/1998-10/msg00145.html (7,870 bytes)
- 6. Spitfire Fender Welding Question (score: 1)
- Author: "Pat and Kammy Willems" <pwillems@cyberramp.net>
- Date: Fri, 18 Sep 1998 10:40:40 -0500
- A question for anyone who has ever welded on Spitfire fenders. There is a seam aft of the rear wheels where the bottom of the fender is spot welded to the rear valance and the side panels that are pa
- /html/spitfires/1998-09/msg00389.html (7,081 bytes)
- 7. Re: battery box removal and tonneaus (score: 1)
- Author: "Pat and Kammy Willems" <pwillems@cyberramp.net>
- Date: Sat, 26 Sep 1998 16:29:56 -0500
- You are correct, the battery box is held in by spot welds. You can either use a 1/4" drill bit or a spot weld cutter to get the old box out. You can buy a spot weld cutter from Eastwood. Drill out t
- /html/spitfires/1998-09/msg00535.html (8,450 bytes)
This search system is powered by
Namazu