- 21. Distributor setting (score: 1)
- Author: Bobpcoe@aol.com
- Date: Wed, 18 Jul 2001 23:26:05 EDT
- Thanks to Terry and Joe for responding,your picture shows the distributor in the same position as mine. The Hanes manual says install the drive gear with off centred slot at 12 and 6 o clock Page 73.
- /html/spitfires/2001-07/msg00366.html (6,812 bytes)
- 22. Where do the wires go? (score: 1)
- Author: Bobpcoe@aol.com
- Date: Thu, 19 Jul 2001 18:08:07 EDT
- I have a multi plug dangeling down just behind the passengers map reading light it has six wires going to it - White & Orange / Green & Orange / Orange & Black and purple. I can rember there being a
- /html/spitfires/2001-07/msg00375.html (6,854 bytes)
- 23. Re: Paint experts (score: 1)
- Author: Bobpcoe@aol.com
- Date: Sat, 21 Jul 2001 19:32:14 EDT
- This effect is achieved in a three layer process, the gold being the ground coat, the mid coat being tinted with red pigment dye and the final coat being clear coat. Commonly used on motor cytcles an
- /html/spitfires/2001-07/msg00393.html (7,213 bytes)
- 24. Earth strap (score: 1)
- Author: Bobpcoe@aol.com
- Date: Sat, 21 Jul 2001 19:39:56 EDT
- Can anybody tell me where the earth lead go's on steering rack. I cant get the indicators working or the horn .I see there is a earth strap listed in the Rimmer book but not avalilable.It must be eas
- /html/spitfires/2001-07/msg00394.html (6,711 bytes)
- 25. Can"t find Spark -Any Bright Spark's out there (score: 1)
- Author: Bobpcoe@aol.com
- Date: Sun, 29 Jul 2001 17:49:41 EDT
- I'm trying to get my rebuild running........ I have compression I have fuel but no spark. Should the aluminum body of the coil be grounded? Should I have 12 volts from the Pos and Neg side of the coi
- /html/spitfires/2001-07/msg00511.html (7,390 bytes)
- 26. Lucas amplifier (score: 1)
- Author: Bobpcoe@aol.com
- Date: Sun, 29 Jul 2001 17:55:34 EDT
- If you have a lucas amplifier model AB14 ....I need your help...........desperately.... I need help with the wiring, please can you look at your wiring, as I need to know what wire goes where etc....
- /html/spitfires/2001-07/msg00512.html (6,427 bytes)
- 27. SU Carburetors (score: 1)
- Author: Bobpcoe@aol.com
- Date: Sun, 29 Jul 2001 17:56:46 EDT
- Does anyone know a website address for re-build on SU carbureters? Bob COe
- /html/spitfires/2001-07/msg00513.html (6,249 bytes)
- 28. How can i tell if me Amplifier is working????? (score: 1)
- Author: Bobpcoe@aol.com
- Date: Sun, 29 Jul 2001 23:27:29 EDT
- How can i tell if my amplifier is working what should the volts be from the coil HT lead when i am cranking the motor ?
- /html/spitfires/2001-07/msg00524.html (6,532 bytes)
- 29. Distributor Cam Rotates (score: 1)
- Author: Bobpcoe@aol.com
- Date: Mon, 30 Jul 2001 18:22:38 EDT
- I think I may be narrowing my problem down with the help from one lister My cam at the base just beneath the rotor arm spins freely but does not turn when the distributor is turning. I have taken the
- /html/spitfires/2001-07/msg00556.html (7,046 bytes)
- 30. Fwd: Distributor Cam Rotates (score: 1)
- Author: Bobpcoe@aol.com
- Date: Mon, 30 Jul 2001 19:48:29 EDT
- Return-path: <Bobpcoe@aol.com> From: Bobpcoe@aol.com Full-name: Bobpcoe Message-ID: <bc.1812b1a6.2897382e@aol.com> Date: Mon, 30 Jul 2001 18:22:38 EDT Subject: Distributor Cam Rotates To: spitfires@a
- /html/spitfires/2001-07/msg00559.html (7,502 bytes)
- 31. Distributor Wanted (score: 1)
- Author: Bobpcoe@aol.com
- Date: Tue, 31 Jul 2001 22:56:02 EDT
- Wanted 1976 spitfire 1500 Distributor standard point's type Please be gentel I'm on a budget Thanks Bob Coe
- /html/spitfires/2001-07/msg00581.html (6,306 bytes)
This search system is powered by
Namazu