- 1. [oletrucks] Mustang II front suspension (score: 1)
- Author: Bob_Keeland@usgs.gov (Bob Keeland)
- Date: Tue, 19 Oct 1999 09:40:16 -0600
- David and Alan, Since each of you have installed a mustang II front suspension I have a question about ride height. Specifically, how much did the IFS lower the front of your trucks, and who did you
- /html/oletrucks/1999-10/msg00347.html (7,901 bytes)
- 2. Re: [oletrucks] Mustang II front suspension (score: 1)
- Author: miq@teleport.com
- Date: Tue, 19 Oct 1999 08:17:19 -0700 (PDT)
- Check out the before and after shots on my '57, you can see how far it was dropped, and this was the minimum. I used heavier duty springs. www.teleport.com/~miq/oletruck.html -- __ Miq Millman miq@te
- /html/oletrucks/1999-10/msg00348.html (8,046 bytes)
- 3. Re: [oletrucks] Mustang II front suspension (score: 1)
- Author: The Swinging Aligator In The Swamp <monadnoc@crystal-mtn.com>
- Date: Tue, 19 Oct 1999 16:56:40 -0400
- Bob, I have used the kit from Fatman Fabrications in my '53. However I have not yet seen the final ride height due to the fact that the body and engine/tranny have yet to be re-installed (V-8 and TH
- /html/oletrucks/1999-10/msg00353.html (8,714 bytes)
- 4. Re: [oletrucks] Mustang II front suspension (score: 1)
- Author: Alan Gingles <agingles@nucleus.com>
- Date: Tue, 19 Oct 1999 17:08:57 -0700
- Bob, The MII front end I used dropped the front end over 6 inches. I have approx. 7 inches clearance under the front bumper. The kit I used was made in Canada by Hercules Machine in Winnipeg. As far
- /html/oletrucks/1999-10/msg00359.html (8,508 bytes)
- 5. Re: [oletrucks] Mustang II front suspension (score: 1)
- Author: "dave riffel" <cafe_dave@hotmail.com>
- Date: Tue, 19 Oct 1999 16:23:01 PDT
- Specifically, how much did the IFS Bob, The Heidt's Must. II kit I used lowered the front of my truck 6" or so at the front bumper. Stock bumper height was 13" or 14" with 235/75/15 tires. Must. II b
- /html/oletrucks/1999-10/msg00361.html (9,602 bytes)
- 6. Re: [oletrucks] Mustang II front suspension (score: 1)
- Author: "william moldenhauer" <wmh678@worldnet.att.net>
- Date: Tue, 19 Oct 1999 18:43:57 -0500
- I think that Dave got the two inch drop spindles as I did .they drop the truck an additional two inches after the swap.it is lower than I would like to have it but have not had any clearance problems
- /html/oletrucks/1999-10/msg00363.html (9,149 bytes)
This search system is powered by
Namazu