Search String: Display: Description: Sort:

Results:

References: [ +from:skyhookroth@aol.com: 20 ]

Total 20 documents matching your query.

1. Re: [oletrucks] Gas tank storage (or sale) (score: 1)
Author: Skyhookroth@aol.com
Date: Tue, 3 May 2005 08:26:05 EDT
I removed gas tanks for other vehicles that developed pin hole leaks. Add a few smooth stones and roll the tank to dislodge the rust. Flush with alcohol and sealed. NAPA (not any parts available) sel
/html/oletrucks/2005-05/msg00018.html (7,274 bytes)

2. Re: [oletrucks] best single carb (score: 1)
Author: Skyhookroth@aol.com
Date: Sun, 6 Mar 2005 20:46:24 EST
Do you have a part number for the carter carb? I've rebuilt the rochester and it dribbles a few weeks later. JR 50 3600 Gettysburg oletrucks is devoted to Chevy and GM trucks built between 1941 and 1
/html/oletrucks/2005-03/msg00020.html (7,242 bytes)

3. Re: [oletrucks] Washer? (score: 1)
Author: Skyhookroth@aol.com
Date: Fri, 25 Feb 2005 11:27:23 EST
Finally after 5 days of soaking in PB, a four foot crow bar, and a slide hammer I got the darn bearings and seals out! But when the bearings came out a washer wich was behind the bearing came out als
/html/oletrucks/2005-02/msg00078.html (7,162 bytes)

4. Re: [oletrucks] Pipe taps? (score: 1)
Author: Skyhookroth@aol.com
Date: Fri, 7 Jan 2005 13:46:16 EST
I have run across a problem on one of my old-car projects, and with all the members out there, I figured somebody might know the answer. I'm plumbing in a heater I bought from Mr 40's and it's a very
/html/oletrucks/2005-01/msg00037.html (7,505 bytes)

5. Re: [oletrucks] Tail lights (score: 1)
Author: Skyhookroth@aol.com
Date: Wed, 19 Jan 2005 15:29:54 EST
Chevy Duty is definitely my preferred vendor to use on all orders that I have placed with them and the quality, in my opinion, is top notch. I know Jim Carters is the one on my crap list.... --wayne
/html/oletrucks/2005-01/msg00097.html (7,372 bytes)

6. [oletrucks] Definative AD truck movie List (score: 1)
Author: Skyhookroth@aol.com
Date: Fri, 13 Feb 2004 12:48:08 EST
Did anyone ever have such a list? John Roth 1950 3600 oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
/html/oletrucks/2004-02/msg00086.html (6,387 bytes)

7. Re: [oletrucks] steering glitch. (score: 1)
Author: Skyhookroth@aol.com
Date: Tue, 17 Feb 2004 11:17:43 EST
I.E. steering turns further to the right than the left by about 4" Took the steering shaft from the steering box and I'm relatively sure this is right, but not totally. Otherwise I'm thinking maybe i
/html/oletrucks/2004-02/msg00105.html (7,182 bytes)

8. Re: [oletrucks] Engine paint color for 216 (score: 1)
Author: Skyhookroth@aol.com
Date: Tue, 20 Jan 2004 09:30:02 EST
The biggest thing is cleaning/degreasing the engine. More often than not the reason the paint doesn't last is because of a dirty engine I agree with Scott. For a simple clean up procedure. I scape of
/html/oletrucks/2004-01/msg00152.html (7,766 bytes)

9. Re: [oletrucks] newer chevy truck question (score: 1)
Author: Skyhookroth@aol.com
Date: Tue, 2 Dec 2003 22:59:55 EST
Or if it's like some F**d's I had, the heater was below the engine take offs and the heater core got plugged with debris! cheers John Roth Gettysburg PA (That bad place if you are from the South) 2nd
/html/oletrucks/2003-12/msg00049.html (8,031 bytes)

10. [oletrucks] Timing on a 1950 235 (score: 1)
Author: Skyhookroth@aol.com
Date: Mon, 22 Dec 2003 14:05:57 EST
I replaced the flywheel on my truck some time ago without noting the steel ball for the timing mark. Without taking the head off to determine TDC, is there another way to check timing? cheers John Ro
/html/oletrucks/2003-12/msg00289.html (6,733 bytes)

11. [oletrucks] Temp Guage 1950 (score: 1)
Author: Skyhookroth@aol.com
Date: Tue, 23 Dec 2003 14:57:00 EST
How do you remove the temperature guage in the dash of a 1950 AD? It is a capillary on the engine side in the head. Merry Christmas John ROth Gettysburg, PA oletrucks is devoted to Chevy and GM truck
/html/oletrucks/2003-12/msg00298.html (6,506 bytes)

12. Re: [oletrucks] Hood badge fastener question (score: 1)
Author: Skyhookroth@aol.com
Date: Tue, 11 Nov 2003 13:43:42 EST
The earlier AD trucks used "clutch head" fasteners for such purposes. It looks like a butterfly pattern. NAPA has some drivers for these screws if you want to maintain the original. oletrucks is devo
/html/oletrucks/2003-11/msg00165.html (6,866 bytes)

13. [oletrucks] 54 Diff (score: 1)
Author: Skyhookroth@aol.com
Date: Sun, 15 Oct 2006 17:51:36 EDT
How does the drive shaft come off the Differential? John Roth 1950 1500 WIP Gettysburg PA
/html/oletrucks/2006-10/msg00094.html (6,178 bytes)

14. Re: [oletrucks] 216 or 235 engine (score: 1)
Author: Skyhookroth@aol.com
Date: Mon, 16 Oct 2006 11:49:16 EDT
i have what i was told is a 235 engine but could be 216 engine with a blown head gasket that i need to get rid of. i am doing the v 8 route in my 53 so its just in the way. make me an offer Where are
/html/oletrucks/2006-10/msg00099.html (6,862 bytes)

15. [oletrucks] Fan Shroud (score: 1)
Author: skyhookroth@aol.com
Date: Tue, 19 Jun 2007 15:22:18 -0400
Anybody know of an fan shroud supplier? My bud has an originalB 216 in a 40 chevy sedan. It overheats in traffic at idle and with most of the radiator area open, the low rpm can't move much air. John
/html/oletrucks/2007-06/msg00052.html (6,728 bytes)

16. Re: [oletrucks] gravity bleed (score: 1)
Author: Skyhookroth@aol.com
Date: Sat, 12 Apr 2008 19:14:59 EDT
Get the gal to help or a vacuum pump and jar arrangement. The internal seals and check valves will overcome any head produced by the difference of gravity at the master cylinder and wheel cylinder. *
/html/oletrucks/2008-04/msg00017.html (6,338 bytes)

17. [Oletrucks] 1950 Faded Speedo (score: 1)
Author: Skyhookroth@aol.com
Date: Sat, 7 Nov 2009 19:29:00 EST
Just getting around to replacing the decals on the gauge cluster. The Speedo worked the last time I had the truck on the Road. Is there a Speedo shop to replace the odometer? Or should I use the chin
/html/oletrucks/2009-11/msg00009.html (7,089 bytes)

18. Re: [Oletrucks] Parts (score: 1)
Author: skyhookroth@aol.com
Date: Fri, 30 Jul 2010 11:06:59 -0400
Still have the oil pan? What year engine? hat year brake parts? --Original Message-- rom: oletrucks-bounces@autox.team.net mailto:oletrucks-bounces@autox.team.net] On Behalf Of Ric McAnulty ent: Wedn
/html/oletrucks/2010-07/msg00057.html (8,978 bytes)

19. Re: [Oletrucks] Window replacement (score: 1)
Author: John Roth <skyhookroth@aol.com>
Date: Tue, 23 Jun 2015 19:31:44 -0400
--=_Part_143882_1847915172.1435102304627 boundary="--=_Part_143881_475818520.1435102304596" --=_Part_143881_475818520.1435102304596 Content-Transfer-Encoding: 7bit I had the door off unto a sawhorse.
/html/oletrucks/2015-06/msg00012.html (55,895 bytes)

20. Re: [Oletrucks] Larger overflow tank for radiator (score: 1)
Author: John Roth <skyhookroth@aol.com>
Date: Mon, 19 Sep 2022 11:50:34 +0000 (UTC)
--==5660619833617813417== boundary="--=_Part_5595356_794797584.1663588234849" --=_Part_5595356_794797584.1663588234849 Content-Transfer-Encoding: quoted-printable Engine coolant temperature will be d
/html/oletrucks/2022-09/msg00003.html (13,558 bytes)


This search system is powered by Namazu