- 1. [oletrucks] bed wood (score: 1)
- Author: Smallblocksteve1@aol.com
- Date: Sun, 1 Dec 2002 12:17:33 EST
- Can someone tell me how deep and wide the notch is on the edge of the bed wood where the bed strips set in on my ' 51 A.D. 3100 I got some free oak boards and will be making my own wood kit. Thanks,
- /html/oletrucks/2002-12/msg00002.html (7,010 bytes)
- 2. Re: [oletrucks] Clutch head screws (score: 1)
- Author: Smallblocksteve1@aol.com
- Date: Tue, 24 Dec 2002 11:05:56 EST
- I usually get by using the correct size phillups head screwdriver and it doesn't chew up the slot.But nothing beats the right tool for the job! smallblocksteve '51 Chevy A.D. oletrucks is devoted to
- /html/oletrucks/2002-12/msg00281.html (6,696 bytes)
- 3. [oletrucks] wiper switch knob (score: 1)
- Author: Smallblocksteve1@aol.com
- Date: Fri, 27 Dec 2002 17:27:34 EST
- Hi folks, if anyone has changed to electric wipers from chevy duty on your '47-'53 A.D. and hates the plastic knob like I did contact me off list to convert the old chrome knob to replace that out of
- /html/oletrucks/2002-12/msg00295.html (6,770 bytes)
- 4. [oletrucks] AD Door adjustment (score: 1)
- Author: Smallblocksteve1@aol.com
- Date: Mon, 21 Oct 2002 22:39:30 EDT
- Has anyone seen a tech article on correct procedure for door adjustments for the AD trucks? Thanks smallblocksteve ' 51 Chevy 3100 oletrucks is devoted to Chevy and GM trucks built between 1941 and 1
- /html/oletrucks/2002-10/msg00249.html (7,307 bytes)
- 5. [oletrucks] AD Door adjustment (score: 1)
- Author: Smallblocksteve1@aol.com
- Date: Tue, 22 Oct 2002 18:32:24 EDT
- Thanks for all the response guys. Doors are fitting and working much better. This site is full of knowledgible people. smallblocksteve ' 51 Chevy 3100 oletrucks is devoted to Chevy and GM trucks buil
- /html/oletrucks/2002-10/msg00263.html (7,289 bytes)
- 6. [oletrucks] aftermarket directional switch (score: 1)
- Author: Smallblocksteve1@aol.com
- Date: Sun, 27 Oct 2002 00:32:34 EDT
- Does anyone have the wiring schematics for an aftermarket 8 wire directional switch made by "Grote" with the following colors: red, yellow, green, blue, black, grey, grey-black stripe, and white? Tha
- /html/oletrucks/2002-10/msg00342.html (6,612 bytes)
- 7. Fwd: [oletrucks] Drive Shaft (score: 1)
- Author: Smallblocksteve1@aol.com
- Date: Thu, 11 Apr 2002 17:01:44 EDT
- Rich, when measuring for driveshaft length push the tranny yoke all the way in then pull it back out 1 inch. Now measure from the u-joint center of the yoke to the u-joint center of the rearend flang
- /html/oletrucks/2002-04/msg00321.html (8,783 bytes)
- 8. [oletrucks] v-8 swap '51 chev p/u (score: 1)
- Author: Smallblocksteve1@aol.com
- Date: Tue, 5 Feb 2002 10:03:19 EST
- has anyone put a v-8 in a '48 to '54 chevy p/u using stock steering without moving the box out? Which manifolds, headers etc. worked? Any special tips? oletrucks is devoted to Chevy and GM trucks bui
- /html/oletrucks/2002-02/msg00088.html (6,985 bytes)
This search system is powered by
Namazu