Mail Archive Search: <+from:Mask1966@aol.com>

Results:

References: [ +from:Mask1966@aol.com: 163 ]

Total 163 documents matching your query.

101. [oletrucks] Intake help (score: 1): Author: Mask1966@aol.com; Date: Mon, 16 Jun 2003 21:03:59 EDT; I am putting together a mostly stock '86 305 for the street. I wanted a 2 bbl carb for some economy and traded a guy for an early intake and Rochester 2GCV carb. The intake is P/N 8877652 dated D186.; /html/oletrucks/2003-06/msg00235.html (7,345 bytes)
102. Re: [oletrucks] A Few New Pictures (score: 1): Author: Mask1966@aol.com; Date: Wed, 18 Jun 2003 19:46:55 EDT; My '48 had the same setup. I assume it was an option, either factory or dealer installed. Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Falls, TX oletrucks is devoted to Chevy and GM trucks; /html/oletrucks/2003-06/msg00288.html (7,482 bytes)
103. Re: [oletrucks] Need some electrical assistance?? (score: 1): Author: Mask1966@aol.com; Date: Wed, 18 Jun 2003 19:51:18 EDT; Do you have the engine block well grounded to the frame? The starter could be using the temp gauge tubing as the ground it needs. The ground is very important for lots of things. Mike Klepp '48 3100; /html/oletrucks/2003-06/msg00289.html (7,651 bytes)
104. Re: [oletrucks] Black Chrome. (score: 1): Author: Mask1966@aol.com; Date: Mon, 5 May 2003 12:59:34 EDT; I have rebuilt the entire fronted of my '48; newer style tie rod ends and drag link, new king pins, new shackles and bushings, replaced springs, upgraded to Bendix brakes, radial tires, added a subur; /html/oletrucks/2003-05/msg00077.html (9,377 bytes)
105. [oletrucks] Re: [old-chevy-truck] 235 ENGINE, CARBURETOR QUESTION (score: 1): Author: Mask1966@aol.com; Date: Wed, 7 May 2003 18:36:30 EDT; Sounds like you have a carb from an automobile of the same era. I ran one on my truck for a while until I found the right Rochester to rebuild. Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita; /html/oletrucks/2003-05/msg00149.html (7,191 bytes)
106. [oletrucks] Wheel Identification Help (score: 1): Author: Mask1966@aol.com; Date: Sat, 10 May 2003 19:20:43 EDT; Hey truckers, I know many of us remember the "Dukes of Hazard" TV show with the bright orange Charger, General Lee. Well, I need to know who made the spoke mag wheels on the General. Who was the manu; /html/oletrucks/2003-05/msg00219.html (6,748 bytes)
107. [oletrucks] TH350 cooler (score: 1): Author: Mask1966@aol.com; Date: Wed, 14 May 2003 22:36:05 EDT; I know the lines between the trans and the cooler or radiator are normally steel, but has anyone used hoses instead? I think they would be much easier to route and keep out of harms way than steel. W; /html/oletrucks/2003-05/msg00285.html (7,674 bytes)
108. [oletrucks] Jim Carter's sight (score: 1): Author: Mask1966@aol.com; Date: Wed, 14 May 2003 22:49:35 EDT; For those who might want to take a look a my '48 Deluxe cab, it is this month's feature truck on the Jim Carter web site. Go to <A HREF="http://www.oldchevytrucks.com/cgi-bin/htmlos.cgi/start.htm"> h; /html/oletrucks/2003-05/msg00287.html (7,140 bytes)
109. [oletrucks] TH350 Cooler (score: 1): Author: Mask1966@aol.com; Date: Thu, 15 May 2003 12:34:05 EDT; Thanks for all the inputs on the hose question. I now know which way to go. Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Falls, TX oletrucks is devoted to Chevy and GM trucks built between; /html/oletrucks/2003-05/msg00302.html (7,591 bytes)
110. Re: [oletrucks] Engine Suggestions (score: 1): Author: Mask1966@aol.com; Date: Thu, 22 May 2003 12:23:24 EDT; Phil, Looking at your pictures I think you have a 235 that has been disguised with a 216 valve cover or an actual 1953 car engine that originally had a powerglide behind it. Mike Klepp '48 3100 5 win; /html/oletrucks/2003-05/msg00436.html (7,514 bytes)
111. Re: [oletrucks] tie rod ends (score: 1): Author: Mask1966@aol.com; Date: Tue, 27 May 2003 12:34:43 EDT; Wayne, I did this to my '48 for the same reasons. It is an improvement you will enjoy. To remove the balls, grind the shaft flush or a little below the steering arm. Then center punch and drill a hol; /html/oletrucks/2003-05/msg00477.html (7,916 bytes)
112. Re: [oletrucks] tie rod ends (score: 1): Author: Mask1966@aol.com; Date: Tue, 27 May 2003 20:18:57 EDT; I think the replacement balls have a threaded shaft with nut for attaching. A new ball and other components will not compare with the newer style tie rod ends. If non-original is OK, I'd go with the; /html/oletrucks/2003-05/msg00494.html (7,593 bytes)
113. Re: [oletrucks] Assembly procedures (score: 1): Author: Mask1966@aol.com; Date: Tue, 27 May 2003 20:23:32 EDT; Grant, Not only did I put together inner and outer fenders, but I assembled the entire front clip, fenders, grill, radiator support, etc, and then attached the whole assembly on the truck. Of course,; /html/oletrucks/2003-05/msg00496.html (7,305 bytes)
114. Re: [oletrucks] Free 235 motor (score: 1): Author: Mask1966@aol.com; Date: Wed, 28 May 2003 12:23:27 EDT; If this motor is indeed the original from a '63, it's not a 235. 1962 was the last year for car and truck 235s. Could be a 230 or 250, much different than the 235. Mike Klepp '48 3100 5 window '65 C-; /html/oletrucks/2003-05/msg00534.html (7,042 bytes)
115. Re: [oletrucks] first time (score: 1): Author: Mask1966@aol.com; Date: Mon, 7 Apr 2003 12:37:55 EDT; On that note.......recently, a couple of guys who work on Sheppard Air Force Base here in Wichita Falls, have started up a monthly informal car show on the base. It is held in a large, empty corner o; /html/oletrucks/2003-04/msg00117.html (8,646 bytes)
116. Re: [oletrucks] 54-55 1st splash pan (score: 1): Author: Mask1966@aol.com; Date: Mon, 7 Apr 2003 19:47:19 EDT; I just got a new Brothers catalog advertising a steel splash apron for $99, on sale. That's a good price in my book. Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Falls, TX oletrucks is devo; /html/oletrucks/2003-04/msg00132.html (7,193 bytes)
117. Re: [oletrucks] Parts truck? (score: 1): Author: Mask1966@aol.com; Date: Tue, 8 Apr 2003 12:45:48 EDT; If you have ever driven an AD without wing windows (and NO air) compared to one with vent windows, there is a big difference. My black '48 in August here in Texas is a killer. God bless stock trucks!; /html/oletrucks/2003-04/msg00154.html (7,689 bytes)
118. Re: [oletrucks] t-shirts (score: 1): Author: Mask1966@aol.com; Date: Sun, 27 Apr 2003 20:15:09 EDT; How about a side or rear 3/4 view of an AD? Chevy & GMC look alike that way. Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Falls, TX oletrucks is devoted to Chevy and GM trucks built between; /html/oletrucks/2003-04/msg00651.html (8,894 bytes)
119. [oletrucks] Road Trip (almost) (score: 1): Author: Mask1966@aol.com; Date: Sun, 27 Apr 2003 20:26:22 EDT; Hey truckers, I will be traveling to Minneapolis MN on Wednesday, and would like to hook up with any willing fellow group members and maybe talk trucks. I'll be flying out again on Saturday, but if y; /html/oletrucks/2003-04/msg00652.html (6,816 bytes)
120. Re: [oletrucks] Distributor Gear (score: 1): Author: Mask1966@aol.com; Date: Sun, 16 Mar 2003 22:05:29 EST; I think a roll pin is the correct way for the gear to be installed. There has been one in my distributor since I rebuilt my 235. Mike Klepp '48 3100 5 window '65 C-10 stepside '78 C-10 parts truck Wi; /html/oletrucks/2003-03/msg00308.html (7,079 bytes)

Current List: 101 - 120
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9]