- 1. just one more project (score: 1)
- Author: AIRHEDRZ@aol.com
- Date: Mon, 22 May 1995 00:33:02 -0400
- Greetings, I'm slowly bringing a 72B back from 13 years of sitting in a garage and have a few questions for smart soles out there. The car drives fairly well with the exception of when I come to a st
- /html/mgs/1995-05/msg00341.html (7,456 bytes)
- 2. Re: just one more project (score: 1)
- Author: jurrasm@genesis.torrington.com (Mark Jurras)
- Date: Mon, 22 May 1995 08:13:47 -0400
- This may be bad U-joint's. If there is a zerk fitting in the U-jount yoke, lube it. Be ready to R & R it. If you find one please let me know. I'm in Canton. - -Mark = =o&o
- /html/mgs/1995-05/msg00342.html (7,255 bytes)
- 3. Re: just one more project (score: 1)
- Author: mxp@ipl.co.uk (Mike Plumstead)
- Date: Mon, 22 May 1995 15:14:42 +0100
- lube it. Be ready to R & R it. you could try checking the torque settings of the half shaft nuts. the figure is very high, something like 135 ft/lbs and can normally only be obtained by using a 3/4
- /html/mgs/1995-05/msg00347.html (7,197 bytes)
- 4. Re: just one more project (score: 1)
- Author: Allen.Bachelder@vt.edu (Allen Bachelder)
- Date: Mon, 22 May 1995 13:26:55 -0400
- lube it. Be ready to R & R it. you could try checking the torque settings of the half shaft nuts. the figure is very high, something like 135 ft/lbs and can normally only be obtained by using a 3/4
- /html/mgs/1995-05/msg00352.html (7,756 bytes)
- 5. Re: just one more project (score: 1)
- Author: glenns@edge.ercnet.com (Glenn Schnittke)
- Date: Tue, 23 May 1995 01:07:55 -0500
- Lot's of stuff deleted. Allen, are you sure you wanted to use the word "anticipating"? Wouldn't "fearing" or "dreading" be more in order? GS -- "Mine doesn't have a computer in it - I have to do all
- /html/mgs/1995-05/msg00363.html (7,508 bytes)
- 6. Re: just one more project (score: 1)
- Author: Johnmowog@aol.com
- Date: Thu, 25 May 1995 02:05:59 -0400
- re the clutch...check the pin betwixt the pedal and master cyl...if it is worn and the pedal and pushrod holes are ovaled out, you can loose a huge amount of clutch travel. Otherwise...air in lines o
- /html/mgs/1995-05/msg00418.html (7,403 bytes)
This search system is powered by
Namazu