- 1. Vibration at speed (score: 1)
- Author: "n" <twobees@sprynet.com>
- Date: Sat, 2 Oct 1999 00:12:51 -0400
- I've had lots of experience with out-of-balance wheels/tires over the years. But, none as puzzling as this most recent episode: I had four 20 minute sessions with my MGB on track at Summit Point on T
- /html/mgs/1999-10/msg00077.html (7,695 bytes)
- 2. Re: Vibration at speed (score: 1)
- Author: "Eric Zambori" <eaz@snet.net>
- Date: Mon, 4 Oct 1999 07:35:38 -0400
- I have the same type of wheels and tires that you have and I had the same The tie rod ends are so close to the wheels that they scraped off the stick-on lead weights that were added to the inside of
- /html/mgs/1999-10/msg00089.html (8,579 bytes)
- 3. Re: Vibration at speed (score: 1)
- Author: "Dodd, Kelvin" <doddk@mossmotors.com>
- Date: Mon, 4 Oct 1999 12:13:30 -0700
- Norm: Check to make sure the Minator wheels are seating fully on the front and rear hubs. I have run into cases where the hub casting were out of spec. The factory ran into the same problem when the
- /html/mgs/1999-10/msg00108.html (7,482 bytes)
This search system is powered by
Namazu