- 41. Reviving a Stromberg (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Tue, 07 Sep 1999 16:09:30 -0700
- Hi list, I bought a Weber to replace my 77Bs Stromberg. When I bought the car it ran quite well with no hesitation or other carb problems. When I took the strom out it was a miracle it worked because
- /html/mgs/1999-09/msg00290.html (6,711 bytes)
- 42. Re: Driver's side motor mount (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Thu, 09 Sep 1999 00:05:14 -0400
- Marc, I know you can do it. I did in about an hour of fighting. Warm beer I
- /html/mgs/1999-09/msg00402.html (6,516 bytes)
- 43. More oil for breakin (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Fri, 10 Sep 1999 11:03:15 -0700
- Hi listees, (I feel formal today) I was wondering if it would be a good idea to put a bit of excess oil into the engine for the breakin period. Say engine hold 3Liters, put in four. This way you shou
- /html/mgs/1999-09/msg00510.html (7,039 bytes)
- 44. Oil level inside tranny (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Fri, 10 Sep 1999 12:12:25 -0700
- Hi list, I will be installing my engine back end tomorrow (flywheel,back plate,clutch,tranny) Can some one point out how I must check for oil level inside the tranny? I had it rebuilt and left it on
- /html/mgs/1999-09/msg00518.html (6,748 bytes)
- 45. Re: Honda Roadster (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Sun, 12 Sep 1999 23:25:47 -0400
- Neil, Eric and all, I have been reading about the Honda S2000 and its max HP specs are rated at 9000RPM! mind you, no matter how good the engine is, driving in the 7000-9000 range will wear your engi
- /html/mgs/1999-09/msg00636.html (7,004 bytes)
- 46. Re: Honda Roadster (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Sun, 12 Sep 1999 23:49:26 -0400
- Oops I missed a word, Luxary entry level sports car that is. A porsche Boxter starts out at 43000$, BMW Z3 31000$, Honda S2000, 32000$. So thats about it as far as prices go. Enrique
- /html/mgs/1999-09/msg00638.html (6,946 bytes)
- 47. Engine installation (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Wed, 15 Sep 1999 12:09:26 -0700
- Hi list, I was ready to put in my engine and tranny last sunday when I looked at my storage room and to my dismay 8 wheels and tires had been stolen. You can imagine how I freaked out. I called the P
- /html/mgs/1999-09/msg00768.html (7,397 bytes)
- 48. hood to window seal (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Mon, 20 Sep 1999 22:53:40 -0400
- Hi list, I finished installing my hood to window seal. When I close the hood and lock both hinges the hoods fabric and window frame meet perfectly from the center on out to the left and right up to a
- /html/mgs/1999-09/msg00996.html (6,672 bytes)
- 49. Engine support shims (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Thu, 23 Sep 1999 10:11:40 -0700
- Hi list, I have two shim plates for my engine support. Is this correct? I understand they fit on the right support. Can some one please confirm. Thanks a billion, Enrique SPAN Inc (Enrique Claure) 84
- /html/mgs/1999-09/msg01089.html (6,458 bytes)
- 50. Re: Someone Buy This Guy a Torque Wrench! (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Fri, 24 Sep 1999 09:19:07 -0700
- Most of us have Torque wrenches but few know how, where or what to use to keep them calibrated. I own a Stanley Pro wrench that I take great care of but have never calibrated. Any ideas on the subjec
- /html/mgs/1999-09/msg01168.html (7,782 bytes)
- 51. Testing starter engine (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Fri, 24 Sep 1999 21:51:05 -0400
- Hi list, haynes recommends installing the starter Motor before putting in the engine. I decided to test it before installing but could not get the motor to rotate? On the selenoid there are two big c
- /html/mgs/1999-09/msg01228.html (6,859 bytes)
- 52. Eudora mess up (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Mon, 27 Sep 1999 11:09:20 -0700
- Sorry to bomb the list but about 30 messages on my Eudora email program have suddenly mixed the subject title with another message that does not correspond? This is crazy! I ran my up to date antivir
- /html/mgs/1999-09/msg01332.html (6,500 bytes)
- 53. Re: NEW TOYS!!!!! (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Tue, 28 Sep 1999 09:50:05 -0700
- Lonn, does your clutch click every time you press the pedal? if so it may be you have play in slave cylinder shaft and dowel pin due to wear. Just a thougt, Enrique SPAN Inc (Enrique Claure) 8416 NW
- /html/mgs/1999-09/msg01401.html (6,666 bytes)
- 54. Re: Head gasket repair (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Wed, 29 Sep 1999 11:51:45 -0700
- Edwin, you maybe able to save money if you do the job your self. You can take the head to a machine shop to see if needs work. Keep the revs down, make sure you have water in the radiator, oil in the
- /html/mgs/1999-09/msg01470.html (7,419 bytes)
- 55. Re: Sadly, NO NEW TOYS (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Wed, 29 Sep 1999 12:01:02 -0700
- Lonn, I know the feeling when you put your mind on something and it doesnt work out. A few months ago I saw a 59 bugeye at a show. It was on sale and I offered the guy 2000$ up front. THe fella said
- /html/mgs/1999-09/msg01471.html (7,249 bytes)
- 56. Re: Relay questions (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Sun, 01 Aug 1999 22:13:41 -0700
- Hi list, I am installing the starter and ignition switch relay. After reading Rick Ewalds advice (see below)I understand the starter cables go as follows: N (brown) to 30/15 from battery B (black) 85
- /html/mgs/1999-08/msg00037.html (7,452 bytes)
- 57. Fan Relay instructions (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Tue, 03 Aug 1999 14:56:09 -0700
- Hi list, anybody installed the VB Fan Relay? I just bought mine but it came with no instructions? TIA Enrique SPAN Inc (Enrique Claure) 8416 NW 66 St Miami Florida 33166 Forwarding Offices
- /html/mgs/1999-08/msg00126.html (6,317 bytes)
- 58. Steering colunm alignment (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Sat, 07 Aug 1999 20:15:22 -0700
- Hi list, I was fastening my dash harness when I noticed I could see light trough the bottom of my steering column on the bottom of the fire wall. The bottom of the column ends in a cylinder with a li
- /html/mgs/1999-08/msg00292.html (7,193 bytes)
- 59. Wanted part (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Sun, 08 Aug 1999 20:01:52 -0700
- Hi list, if any of you has a good used of new steering column for a 77B let me know. ENrique SPAN Inc (Enrique Claure) 8416 NW 66 St Miami Florida 33166 Forwarding Offices
- /html/mgs/1999-08/msg00321.html (6,295 bytes)
- 60. Purple pink ignition cable (score: 1)
- Author: Enrique Claure <spaninc@ceibo.entelnet.bo>
- Date: Thu, 12 Aug 1999 16:58:39 -0700
- Hi list, I was going over my dash harness to make sure everything is OK and found a cut cable coming out of the key lock system. The free cable is a purple pink strange thing is that there is no free
- /html/mgs/1999-08/msg00577.html (6,969 bytes)
This search system is powered by
Namazu