- 1. Re: Squeeze this into an LBC! (score: 1)
- Author: "Steve Devine" <gaveleer@mediaone.net>
- Date: Sun, 24 Feb 2002 19:15:51 -0600
- If you remove all the ancillaries you will find a heavily bored over rover v8! MGBs. /// /// mgs@autox.team.net mailing list /// or try http://www.team.net/cgi-bin/majorcool ///
- /html/mgs/2002-02/msg00715.html (7,424 bytes)
- 2. Standard exhaust on an mgb. (score: 1)
- Author: "Steve Devine" <gaveleer@mediaone.net>
- Date: Mon, 28 Jan 2002 19:00:24 -0600
- Hello all I have the privledge of helping a fellow MGer out with the exhaust on his car. Ive replaced many an exhaust on an MGB and have always had problems with the donut gaskets leaking. The only c
- /html/mgs/2002-01/msg00952.html (7,222 bytes)
- 3. Re: no high beams now (score: 1)
- Author: gaveleer <gaveleer@mediaone.net>
- Date: Thu, 01 Nov 2001 18:56:52 -0500
- Hey Dan, Sounds like its time to clean the fuse holder connections, they get a little corrosion on them and begin to act intermediately in the same manner you describe. Steve Devine /// /// mgs@autox
- /html/mgs/2001-11/msg00023.html (7,289 bytes)
- 4. Re: MGB HELP (score: 1)
- Author: gaveleer <gaveleer@mediaone.net>
- Date: Tue, 06 Nov 2001 11:51:37 -0500
- Hello Wesley, If you have the engine out, here's how I usually remove the drivers side mount. Angle grinder and chisel. If the rubber has ripped at the top half leaving the rubber on the lower, grind
- /html/mgs/2001-11/msg00136.html (10,672 bytes)
- 5. Re: MGB HELP (score: 1)
- Author: gaveleer <gaveleer@mediaone.net>
- Date: Tue, 06 Nov 2001 11:51:08 -0500
- Hello Wesley, If you have the engine out, here's how I usually remove the drivers side mount. Angle grinder and chisel. If the rubber has ripped at the top half leaving the rubber on the lower, grind
- /html/mgs/2001-11/msg00137.html (10,683 bytes)
- 6. Re: mga-nash engine swap? (score: 1)
- Author: gaveleer <gaveleer@mediaone.net>
- Date: Fri, 09 Nov 2001 01:04:39 -0500
- Hi Bill, Wow you really have been run through the guantlet. Lots of decisions. My view is its better to see one on the road then rotting away in the yard. I had a similar sitation with a 1600 mga, bu
- /html/mgs/2001-11/msg00233.html (8,164 bytes)
- 7. Re: Cutting Question (score: 1)
- Author: gaveleer <gaveleer@mediaone.net>
- Date: Fri, 16 Nov 2001 12:21:01 -0500
- Can you send a picture of the situation, Im not sure what your trying to Is the area to small for a grinder, Be creful with heat unless everything heated is expendable if you usuing a torch. If the b
- /html/mgs/2001-11/msg00376.html (7,518 bytes)
This search system is powered by
Namazu