- 1. Re: Purpose of NLG wire (score: 1)
- Author: Solentmg@aol.com
- Date: Sun, 2 Sep 2001 19:49:12 EDT
- Its to ensure that the wipers park in the correct position. Reg. 75 MGBV8 Safety Fast. /// /// mgs@autox.team.net mailing list /// (If they are dupes, this trailer may also catch them.)
- /html/mgs/2001-09/msg00050.html (6,485 bytes)
- 2. Re: Fuel Pump Contacts (score: 1)
- Author: Solentmg@aol.com
- Date: Tue, 4 Sep 2001 20:02:36 EDT
- I would go for a new electronic fuel pump, in my experience they seem to last almost forever. The cheapest scource is JC Witney, sam pump as all the major parts peaple stock at two thirds of the pric
- /html/mgs/2001-09/msg00118.html (7,039 bytes)
- 3. Re: Low pressure after rebuild (score: 1)
- Author: Solentmg@aol.com
- Date: Mon, 10 Sep 2001 19:26:56 EDT
- Try using a mechanical gauge of known accuracy first. I have had both electric sender units and a mechanical gauge go bad. Hopefully this will prove your engine to be just fine. Reg. 75 MGBV8. Footpr
- /html/mgs/2001-09/msg00284.html (6,942 bytes)
- 4. Re:Tachometers (score: 1)
- Author: Solentmg@aol.com
- Date: Sun, 12 Aug 2001 16:05:04 EDT
- Does anybody out there know how to convert an electric impulse tachometer, as fitted to 76 models MGB, to read correctly for a V8 engine.? TIA. Reg. 75 MGB KOMBB /// /// mgs@autox.team.net mailing li
- /html/mgs/2001-08/msg00228.html (6,450 bytes)
- 5. Re: TR8 Trans oil. (score: 1)
- Author: Solentmg@aol.com
- Date: Mon, 16 Jul 2001 20:53:19 EDT
- Does any one know how much oil a TR8 trans takes and what viscosity? Am in the process of converting my "B" to V8, and of course do not have the Triumph data. TIA. Reg. 75 MGB KOMBB /// /// mgs@autox
- /html/mgs/2001-07/msg00626.html (6,457 bytes)
- 6. Re:Octogon Spares. (score: 1)
- Author: Solentmg@aol.com
- Date: Sat, 28 Jul 2001 19:10:25 EDT
- Does any one have the phone number or the address for a company called Octogon Spares. TIA. Reg. 75 MGB KOMBB /// /// mgs@autox.team.net mailing list /// (If they are dupes, this trailer may also cat
- /html/mgs/2001-07/msg01178.html (6,603 bytes)
- 7. Re: Shock Removal (score: 1)
- Author: Solentmg@aol.com
- Date: Thu, 10 May 2001 18:10:05 EDT
- Common MGB problem. You must be sure and use never sieze on the pins when you install them. The fulcrum pins get rusty and there is no means of lubricating them once installed. Reg. 75 MGB Roadster 7
- /html/mgs/2001-05/msg00361.html (6,749 bytes)
- 8. Re: Guage rebuilds (score: 1)
- Author: Solentmg@aol.com
- Date: Sun, 15 Apr 2001 19:32:25 EDT
- You should consider, MOMA. ABQ. NEW MEXICO. Ph. 1.505-766-6661 I have had the speedometers overhauled and recalibrated for two differant MGBs by this company. They did a first class job quickly and i
- /html/mgs/2001-04/msg00449.html (7,505 bytes)
- 9. Re: Dear Vehicle Owner (score: 1)
- Author: Solentmg@aol.com
- Date: Tue, 27 Mar 2001 19:01:59 EST
- Perhaps I should get the derelict shell in my back yard reistered quick, and get $499 more for it than its worth. Reg. 72 RWA Midget 71 MGB 75 MGB 71 TR6 KOMBB /// /// mgs@autox.team.net mailing list
- /html/mgs/2001-03/msg01197.html (7,529 bytes)
- 10. Re: NON LBC, Trip to England, Dollars to Pounds (score: 1)
- Author: Solentmg@aol.com
- Date: Thu, 5 Oct 2000 16:15:35 EDT
- I returned from a trip to England this Monday. The best way to convert $ to pounds is to take $ with you and then convert them to pounds at any British high st. bank. There are ATMs everywhere, and y
- /html/mgs/2000-10/msg00291.html (8,045 bytes)
- 11. Re: Clutch Stuck? (score: 1)
- Author: Solentmg@aol.com
- Date: Wed, 19 Jul 2000 21:17:43 EDT
- A much safer way to free off a rusted on clutch, is to jack the car up and put it on four jack stands. Then start the engine with top gear engaged.Run it up to about 30mph as indicated on the speedo
- /html/mgs/2000-07/msg00847.html (7,972 bytes)
- 12. Re: Mounting Trans (score: 1)
- Author: Solentmg@aol.com
- Date: Tue, 25 Jul 2000 09:11:27 EDT
- There should be two long mounting bolts. These go at the bottom of the bell housing to allow the front exhaust mounting bracket to be fitted. Reg. 70 MGB ROADSTER 75 MGB ROADSTER 71 TR6
- /html/mgs/2000-07/msg01097.html (6,357 bytes)
- 13. Re: Concorde Crash (score: 1)
- Author: Solentmg@aol.com
- Date: Wed, 26 Jul 2000 08:39:38 EDT
- Almost sure that the crash you are refering to was a Russian prototype, and as a result they gave up the project. Reg. 70 MGB ROADSTER 75 MGB ROADSTER 71 TR6
- /html/mgs/2000-07/msg01177.html (8,209 bytes)
- 14. Re: generators and pos ground (score: 1)
- Author: Solentmg@aol.com
- Date: Mon, 31 Jul 2000 14:42:12 EDT
- Is there any one on the list who has any knowledge of a replacement 5 speed trans that will fit a TR6.? I have the body shell off mine and now seems like the best time to do what must be a really wor
- /html/mgs/2000-07/msg01527.html (7,268 bytes)
- 15. Re: Trunk lid won't open (score: 1)
- Author: Solentmg@aol.com
- Date: Tue, 6 Jun 2000 08:37:53 EDT
- You can get your trunk lid open by drilling a 1/8 diameter hole directly below the lock. You can then push a nail or similar through the hole and psh the internal part of the catch and release it.Mak
- /html/mgs/2000-06/msg00360.html (7,248 bytes)
- 16. Re: NO LBC - Political rant - was: Re: Hillary "Panther" Clinton - NO LBC - Interesting Reading (score: 1)
- Author: Solentmg@aol.com
- Date: Thu, 8 Jun 2000 20:29:11 EDT
- Well said Larry. As a relocatd Brit and from where i am sitting I whole heartedly agree!! Reg. 75 B Roadster 71 B Roadster KOMBB
- /html/mgs/2000-06/msg00529.html (7,032 bytes)
- 17. Re: '74 MGB front suspension (score: 1)
- Author: Solentmg@aol.com
- Date: Thu, 29 Jun 2000 16:49:45 EDT
- Sounds like you have fitted the top trunnion the wrong way round check it against the other side. Reg. 75 B Roadster 71 B Roadster KOMBB
- /html/mgs/2000-06/msg01569.html (6,467 bytes)
- 18. Re: Lucas (score: 1)
- Author: Solentmg@aol.com
- Date: Mon, 15 May 2000 19:55:45 EDT
- Dont brake in the dark whatever you do!!!!!! 75 B Roadster 71 B Roadster KOMBB
- /html/mgs/2000-05/msg00725.html (6,465 bytes)
- 19. Re: Anybody have any experience with these guys? (score: 1)
- Author: Solentmg@aol.com
- Date: Thu, 25 May 2000 08:27:59 EDT
- Yes. I have bought several items from www.mgbreakers and have been very satisfied with the parts and the service. If you buy small parts from them ask for them to be shipped parcel post its much chea
- /html/mgs/2000-05/msg01083.html (6,869 bytes)
- 20. Re: Maybe carb problem is not? (score: 1)
- Author: Solentmg@aol.com
- Date: Tue, 18 Apr 2000 09:57:17 EDT
- Bill. I am as you put it Larry Macy's ''new freind to the list''. The more I think about you problem and with the new info on the timing light, the more convinced I am that your problem is in the ign
- /html/mgs/2000-04/msg00668.html (7,410 bytes)
This search system is powered by
Namazu