- 1. [Healeys] BN2 overdrive (score: 1)
- Author: "kaynmike.bham@juno.com" <kaynmike.bham@juno.com>
- Date: Tue, 1 Mar 2011 21:04:51 GMT
- This o/d is wired w/o the accelerator switch, etc in place. It is actuated via a switch on the dash. (Yes the switch on the trans renders the bottom 2 gears and the reverse out of the mix.) It worked
- /html/healeys/2011-03/msg00025.html (7,143 bytes)
- 2. Re: [Healeys] BN2 overdrive (score: 1)
- Author: Peter Schauss <rpschauss@gmail.com>
- Date: Tue, 1 Mar 2011 16:53:03 -0500
- 1. Verify that the electrical side of the system is working. With the engine running and the overdrive switch on, you should be able to hear a distinct click when you move the shift lever from the 1s
- /html/healeys/2011-03/msg00028.html (7,879 bytes)
- 3. [Healeys] BN2 Overdrive (score: 1)
- Author: Jay Holekamp <jholekamp@sbcglobal.net>
- Date: Tue, 1 Mar 2011 16:26:05 -0800 (PST)
- "Get a guage and check the oil pressure in the unit. The unit needs about 420# to stay engaged. If your pressure is lower than that, the most likely problem is the o-rings in the accumulator." If you
- /html/healeys/2011-03/msg00030.html (7,219 bytes)
This search system is powered by
Namazu