Mail Archive Search: <+from:willig@wtnet.de>

Results:

References: [ +from:willig@wtnet.de: 45 ]

Total 45 documents matching your query.

1. [Healeys] Healey 100 track rods (score: 1): Author: "Thomas + Britta Willig" <willig@wtnet.de>; Date: Sun, 15 Nov 2009 22:28:22 +0100; can anybody tell me how long the steering side rods for the 100 (from center of bolt to center of bolt) should be? Thanks in advance Thomas Willig _______________________________________________ Sup; /html/healeys/2009-11/msg00518.html (6,587 bytes)
2. [Healeys] Steering cednter Rod BN1 -BN2 difference (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sat, 21 Nov 2009 21:48:33 +0100; Can someone out there tell me what the difference is between a BN1 steering center rod and a BN2 center rod? Thank Thomas Willig _______________________________________________ Support Team.Net http:; /html/healeys/2009-11/msg00637.html (6,823 bytes)
3. [Healeys] Looking for a BN2 rh steering lever (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Fri, 4 Dec 2009 22:35:51 +0100; After long measuring, comparing the lft side of the steering to the right side, aided by some members of the list, I found out that my rh steering lever on my 100 BN2 is seriously bend inwards. Is so; /html/healeys/2009-12/msg00157.html (7,346 bytes)
4. Re: [Healeys] Looking for a BN2 rh steering lever (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sat, 5 Dec 2009 17:35:54 +0100; Hi Rich, thanks for the advice, I was thinking already about that, but I was to scared, because I did not know which material it is made of. Have a nice weekend Thomas --Urspr|ngliche Nachricht-- Von; /html/healeys/2009-12/msg00184.html (9,514 bytes)
5. [Healeys] Blue Armacord set for BN2 (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Tue, 15 Dec 2009 20:46:18 +0100; Can someone direct me to a source of good quality (talking about fit) blue Armacord boot and cockpit set for my BN2? I bought a set from one of the oldest suppliers of spare parts in the UK and the f; /html/healeys/2009-12/msg00466.html (7,187 bytes)
6. [Healeys] BN1 rear spring grease nippel (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sun, 10 Jan 2010 14:48:30 +0100; can someone direct me to a source where I can get the long rear spring greaser for a BN1? I know that Norman Nock sells them for the later chassis with UNF threads. But they will not fit the BN1 cha; /html/healeys/2010-01/msg00250.html (6,976 bytes)
7. [Healeys] 100 BN2 Emergency 4 way flasher (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sun, 17 Jan 2010 15:03:54 +0100; I need some advice how to install a emergency 4 way flasher on my BN2. I am a bit scared to burn the expensive flasher relay. Thanks Thomas Willig _______________________________________________ Sup; /html/healeys/2010-01/msg00393.html (6,977 bytes)
8. [Healeys] BN" Carb support struts (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Thu, 28 Jan 2010 19:00:16 +0100; Question: Are the supports struts used on the 100M (H6 carbs) different from the ones used on the standard BN2 (H4 carbs fitted)? As the struts on my 100M were missing, I bought a set of struts from; /html/healeys/2010-01/msg00722.html (6,883 bytes)
9. [Healeys] BN2 Distributor -Help needed (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Fri, 5 Mar 2010 20:12:19 +0100; Some time ago I dismantled my BN2 distributor to clean and inspect it thoroughly. During the disassembly I made sketches of the position of the weights, springs etc.. Stupid me! I lost the notes.. Ca; /html/healeys/2010-03/msg00089.html (6,584 bytes)
10. [Healeys] Healey lamp rings with rivet (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Fri, 12 Mar 2010 21:18:51 +0100; does anybody know if someone sells the original type (the ones with a rivet on top) headlamp rims for the BN2? Thomas Willig _______________________________________________ Healeys@autox.team.net Do; /html/healeys/2010-03/msg00213.html (6,347 bytes)
11. [Healeys] 100 with DW aluminum sump- (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sun, 14 Mar 2010 14:49:37 +0100; I have fitted a DW alum sump to my 100 and I wonder if I have to recalibrate the oils dipstick. Is that necessary? What did other owners do? I am afraid that I am going to overfill the sump, if I add; /html/healeys/2010-03/msg00235.html (7,162 bytes)
12. Re: [Healeys] 100 with DW aluminum sump- (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sun, 14 Mar 2010 15:43:55 +0100; Denis did not mention this topic in his instruction sheet...I might be a bit too cautious, but as the wall thicknesses of the alu sump are far bigger than of the pressed steel, original, sump, I fea; /html/healeys/2010-03/msg00239.html (8,457 bytes)
13. Re: [Healeys] Auxillary Amp Meter (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sun, 21 Mar 2010 11:06:49 +0100; Please remember the 100 uses early 50's style bezel for their instruments. The only source I know for the original type oil temperature instrument, as used on the 100S is http://www.austin-healey.ch/; /html/healeys/2010-03/msg00499.html (9,438 bytes)
14. [Healeys] 100 Starter Motor (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Mon, 22 Mar 2010 22:01:53 +0100; After 30+ years of being separated from the chassis, I started the engine of my BN2 for the first time yesterday. The engine ran like a dream! BUT..the overhauled starter, which I bought many years a; /html/healeys/2010-03/msg00545.html (6,671 bytes)
15. [Healeys] Clutch return spring BN2 (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Fri, 2 Apr 2010 15:11:20 +0200; the clutch return spring of the BN1/2 is attached to the clutch lever on one side and to ???? on the other side. Please advise Regards Thomas Willig _______________________________________________ H; /html/healeys/2010-04/msg00022.html (6,607 bytes)
16. [Healeys] Fitting the armrest pad on BN2 (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Fri, 2 Apr 2010 21:53:38 +0200; In the Anderson-Moment book is written on page 52 "A jute pad covering about 70 percent of the tunnel was glued to the underside of the tunnel carpet". Has anybody taken sketches of the outline of th; /html/healeys/2010-04/msg00028.html (6,683 bytes)
17. Re: [Healeys] Fitting the armrest pad on BN2 (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sat, 3 Apr 2010 12:20:48 +0200; Woolies in the UK sells felt that might match said padding. Would you say that this padding is 3/8" or 1/4" thick? Regards Thomas --Urspr|ngliche Nachricht-- Von: Rich C [mailto:richchrysler@quickcl; /html/healeys/2010-04/msg00033.html (9,054 bytes)
18. [Healeys] Austin-Healey 100 Coupe For Sale (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Thu, 8 Apr 2010 19:02:22 +0200; Please check also: http://www.austin-healey.fr/Amis%20Proprietaires%20French/contrihealey100/am iproprietaire32.html here you can see that the car originally had a standard BN1 gesrshifter layout. Re; /html/healeys/2010-04/msg00151.html (7,345 bytes)
19. [Healeys] "Le Mans" Headlight (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Tue, 20 Apr 2010 19:28:23 +0200; Can someone tell me where I can get the "le mans" headlamp units for my Thanks Thomas Willig _______________________________________________ Healeys@autox.team.net Donate: http://www.team.net/donate.; /html/healeys/2010-04/msg00478.html (6,907 bytes)
20. [Healeys] Tenax fasteners for the 100's armrest (score: 1): Author: "T+ B Willig" <willig@wtnet.de>; Date: Sun, 25 Apr 2010 16:41:58 +0200; Anybody needs the front Tenax fasteners (the ones that are fixed to the carpet-NOT to the Tunnel)? They are not supplied in any kit and I think they are a bit hard to find. I just bought a bag of tho; /html/healeys/2010-04/msg00581.html (7,001 bytes)

Current List: 1 - 20
Page: [1] [2] [3]