- 61. Re: [Healeys] Service Bulletins (score: 1)
- Author: tomleavy@comcast.net
- Date: Tue, 2 Jun 2009 16:20:19 +0000 (UTC)
- Thanks, as always, for your dedication to our cause. I have a tech related question... can you tell us how to set our browser settings so that we don't have to see Ed's postings? <VVVBG> Tom _______
- /html/healeys/2009-06/msg00057.html (8,157 bytes)
- 62. [Healeys] Early Centre Shifter Lever roll pin trouble (score: 1)
- Author: tomleavy@comcast.net
- Date: Fri, 5 Jun 2009 01:38:47 +0000 (UTC)
- Hi Listers My BJ7 shift lever is acting up. I installed new roll pins, but realized that one of the pins jumped out. Of course, the shifter and bronze bushing jumped out. What size do I need (diamete
- /html/healeys/2009-06/msg00109.html (7,133 bytes)
- 63. Re: [Healeys] Fitting Front Shroud (score: 1)
- Author: tomleavy@comcast.net
- Date: Sat, 6 Jun 2009 10:05:51 +0000 (UTC)
- Hi Tom The shroud should readily fit in place. Is this h=the original shroud? There are adjustable tabs, or brackets on the top of each of the front wheelwells. One on the brackets, is screwed to the
- /html/healeys/2009-06/msg00136.html (8,109 bytes)
- 64. Re: [Healeys] shifter roll pins (score: 1)
- Author: tomleavy@comcast.net
- Date: Sat, 6 Jun 2009 10:19:36 +0000 (UTC)
- Hi Listers Thanks for the reply, Doug. I'll try your suggestion. Can you tell me how long the should be? I am concerned with the distance that the bolt passes into the shifter, so it captures the shi
- /html/healeys/2009-06/msg00137.html (7,525 bytes)
- 65. [Healeys] Conclave impressions (score: 1)
- Author: tomleavy@comcast.net
- Date: Sun, 28 Jun 2009 22:21:06 +0000 (UTC)
- Well, we're back from the Conclave. 1200 miles of non-stop Healey fun. My favorite event was the Gymkhana, but the Southern Ontario group did a top notch job all the way around. Every event was caref
- /html/healeys/2009-06/msg00786.html (7,634 bytes)
- 66. [Healeys] Another Healey restored, thanks to the list (score: 1)
- Author: tomleavy@comcast.net
- Date: Sun, 28 Jun 2009 22:24:32 +0000 (UTC)
- Hi Listers I started the restoration some time in February '08. I finished my car on the morning of Sunday June 21 at 5:30 am, got 2 hours of sleep, packed the car and headed for Ontario. It has been
- /html/healeys/2009-06/msg00787.html (7,276 bytes)
- 67. [Healeys] Fwd: Another Healey restored, thanks to the list (score: 1)
- Author: tomleavy@comcast.net
- Date: Mon, 29 Jun 2009 12:32:37 +0000 (UTC)
- Hi MarkNope, I'm still a working stiff, obsessed, but working full time just the same. Thanks for the congrats. l can assure you that regardless of the length of time it takes, these cars are a BLAST
- /html/healeys/2009-06/msg00797.html (7,617 bytes)
- 68. [Healeys] Conclave pix (score: 1)
- Author: tomleavy@comcast.net
- Date: Tue, 30 Jun 2009 03:12:09 +0000 (UTC)
- These are links to some pics that I have posted: http://picasaweb.google.com/tomleavy/AustinHealeyConclave2009# http://picasaweb.google.com/tomleavy/HealeyConclave2009# Enjoy. Tom Thomas Leavy 451 B
- /html/healeys/2009-06/msg00812.html (6,887 bytes)
- 69. Re: [Healeys] Insulation (score: 1)
- Author: tomleavy@comcast.net
- Date: Sat, 4 Jul 2009 10:59:40 +0000 (UTC)
- Hi Keith I used the following product under the tranny tunnel on my BJ7: Look on ebay for:B AUTOMOTIVE HEAT SHIELD & SOUND INSULATION BARRIER 21x48 or you can use this link: B http://tinyurl.com/kj9w
- /html/healeys/2009-07/msg00066.html (8,569 bytes)
- 70. Re: [Healeys] Insulation (score: 1)
- Author: tomleavy@comcast.net
- Date: Sat, 4 Jul 2009 14:37:15 +0000 (UTC)
- Hi John The B's were a typo resulting from copying and pasting the info from the Lowes website. Sorry about that. It should have read: Item #: 13358B Model: BP48025 Regards, Tom John --Original Messa
- /html/healeys/2009-07/msg00072.html (9,705 bytes)
- 71. Re: [Healeys] Insulation (score: 1)
- Author: tomleavy@comcast.net
- Date: Sat, 4 Jul 2009 18:30:43 +0000 (UTC)
- Hi Keith Just to follow up, the sticky backed insulation cost $40, and the roll of mylar bubblewrap cost around $18 bucks. I opted not B to use koolmat or for that matter dynamat or any of those othe
- /html/healeys/2009-07/msg00077.html (7,849 bytes)
- 72. Re: [Healeys] Gearbox & Overdrive Hardware (score: 1)
- Author: tomleavy@comcast.net
- Date: Tue, 7 Jul 2009 17:38:38 +0000 (UTC)
- Hi Mark I recently experienced the same thing on my centreshift gearbox. I torqued everything properly prior to installation, and found it leaked after initial running and subsequent heatup. I retorq
- /html/healeys/2009-07/msg00166.html (7,482 bytes)
- 73. Re: [Healeys] Michael Oritt at PVGP (score: 1)
- Author: tomleavy@comcast.net
- Date: Sun, 19 Jul 2009 11:31:16 +0000 (UTC)
- I can understand the enthusiasm of Mike's passenger. A month later, I am still grinning from ear to ear having been his passenger around a few laps at Shannonville! Regards, Tom _____________________
- /html/healeys/2009-07/msg00468.html (6,864 bytes)
- 74. Re: [Healeys] Concours and heat insulation (score: 1)
- Author: tomleavy@comcast.net
- Date: Tue, 29 Sep 2009 22:18:13 +0000 (UTC)
- Hi Jody Per concours standards, there are only 3 points in play over the jute/tar paper. I couldn't bear the thought of laying tarpaper over my freshly painted new floors. I opted to use mylar faced
- /html/healeys/2009-09/msg00786.html (7,345 bytes)
- 75. [Healeys] Non Healey- Triumph Stag F/S (score: 1)
- Author: tomleavy@comcast.net
- Date: Fri, 16 Oct 2009 02:19:58 +0000 (UTC)
- I have listed my Stag for sale on Ebay, if anyone be interested. Thinning the herd to go racing! Regards, Tom _______________________________________________ Support Team.Net http://www.team.net/dona
- /html/healeys/2009-10/msg00541.html (6,297 bytes)
- 76. Re: [Healeys] Exhaust Hanger replacement (score: 1)
- Author: tomleavy@comcast.net
- Date: Sun, 15 Nov 2009 12:45:16 +0000 (UTC)
- Hi Steve If you're really "hung up" on originality, like I was, try this. I got my hands on aircraft grade shouldered countersunk machine screws. Drilled proper size through the hanger steel/rubber.
- /html/healeys/2009-11/msg00504.html (8,246 bytes)
- 77. [Healeys] Conclave 2010 (score: 1)
- Author: tomleavy@comcast.net
- Date: Wed, 25 Nov 2009 18:10:18 +0000 (UTC)
- First, Happy Thanksgiving to all. Among other things to be thankful for this year, I count this great community of car enthusiasts, and the friends we have made along the way. How fortunate we are to
- /html/healeys/2009-11/msg00756.html (7,670 bytes)
- 78. Re: [Healeys] finish of gauge housing (score: 1)
- Author: tomleavy@comcast.net
- Date: Tue, 1 Dec 2009 20:25:16 +0000 (UTC)
- I used the Eastwood zinc plating kit to replate mine... worked great. Regards, Tom _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.
- /html/healeys/2009-12/msg00044.html (7,631 bytes)
- 79. Re: [Healeys] Harbor Freight Jacks (score: 1)
- Author: tomleavy@comcast.net
- Date: Sat, 5 Dec 2009 16:16:18 +0000 (UTC)
- Buy American. (unless it's British, of course) Tom _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net http://autox.team.net/mailma
- /html/healeys/2009-12/msg00182.html (8,270 bytes)
- 80. [Healeys] anti-theft and locks (score: 1)
- Author: tomleavy@comcast.net
- Date: Wed, 6 Jan 2010 16:38:47 +0000 (UTC)
- Sorry that your message was lost in the fray. I wish that I had the parts to help you, but I don't. You contribute so much to this forum, and to the Healey cause in general, I hope that someone can
- /html/healeys/2010-01/msg00161.html (6,849 bytes)
This search system is powered by
Namazu