- 41. Flashers (score: 1)
- Author: "Tim Davis" <tld6008@mchsi.com>
- Date: Wed, 14 Apr 2004 11:03:36 -0500
- I did some work on the rear end of my car which required me to remove the rear lights. When I put it back together the right rear was much brighter than the left and flashed at a different rate. It l
- /html/healeys/2004-04/msg00435.html (6,695 bytes)
- 42. Re: Flashers (score: 1)
- Author: "Tim Davis" <tld6008@mchsi.com>
- Date: Wed, 14 Apr 2004 21:26:01 -0500
- Thanks to all who commented, it was the wiring reversed on one of the receptacles. Now what is the secret for getting the rubber lip over the chrome bezel? That's one of the most infuriating things I
- /html/healeys/2004-04/msg00471.html (8,407 bytes)
- 43. Re: Starter Solenoid (score: 1)
- Author: tld6008@mchsi.com
- Date: Thu, 15 Apr 2004 17:35:47 +0000
- Mine will click if the battery is not up to snuff or the connections are not clean and tight. After a few attempts feel the cable terminals and see if they feel hot if so there is excessive resistanc
- /html/healeys/2004-04/msg00499.html (9,599 bytes)
- 44. Re: Clutch slave (score: 1)
- Author: tld6008@mchsi.com
- Date: Tue, 20 Apr 2004 17:19:43 +0000
- My E-Z Bleed type kit came with an assortment of rubber 90 deg fittings to connect between hose and different sized bleed nipples. Might be able to buy them at Auto Parts houses. -- Tim Davis BN7
- /html/healeys/2004-04/msg00626.html (8,299 bytes)
- 45. Re: Rubber boot bumpers (score: 1)
- Author: tld6008@mchsi.com
- Date: Tue, 20 Apr 2004 17:21:34 +0000
- I bought mine from Moss although they didn't have a raised lip on the stem to keep them in the hole and had to be glued in. -- Tim Davis BN7
- /html/healeys/2004-04/msg00627.html (6,597 bytes)
- 46. Re: chroming the grill CHROME? STAINLESS? ALUMINUM? (score: 1)
- Author: tld6008@mchsi.com
- Date: Sat, 24 Apr 2004 17:41:30 +0000
- The upper surround can be either stainless or chrome plated steel, I have both. The lower section I've onle seen stainless. The grill is chrome plated steel. -- Tim Davis BN7
- /html/healeys/2004-04/msg00752.html (8,529 bytes)
- 47. RE: Looking for exhaust leak test (score: 1)
- Author: tld6008@mchsi.com
- Date: Sat, 24 Apr 2004 17:48:42 +0000
- Wouldn't you do that when looking for intake leaks? -- Tim Davis BN7
- /html/healeys/2004-04/msg00753.html (9,276 bytes)
- 48. Re: Clutch slave frustration-more (score: 1)
- Author: tld6008@mchsi.com
- Date: Sun, 25 Apr 2004 10:30:06 +0000
- Sounds to me like the clutch disc is stuck to the flywheel. -- Tim Davis BN7
- /html/healeys/2004-04/msg00774.html (9,429 bytes)
- 49. Re: Lyn-Mar Mfg. Co. (score: 1)
- Author: tld6008@mchsi.com
- Date: Tue, 27 Apr 2004 18:46:10 +0000
- Check out "Dunritetool.com" thats where I got mine and it works great. He also makes some other hard (impossible) to find parts. -- Tim Davis BN7
- /html/healeys/2004-04/msg00848.html (6,672 bytes)
- 50. Re: re. Bias-Ply Tire Recommendations (score: 1)
- Author: tld6008@mchsi.com
- Date: Fri, 30 Apr 2004 13:50:21 +0000
- I have seen these used recently at shops that service truck tires (tractor -- Tim Davis BN7
- /html/healeys/2004-04/msg00909.html (8,703 bytes)
- 51. RE: Jag damage photos (score: 1)
- Author: tld6008@mchsi.com
- Date: Mon, 06 Mar 2006 08:28:21 +0000
- Exactly what I thought, back lot of body shop. -- Tim Davis BN7
- /html/healeys/2006-03/msg00123.html (9,614 bytes)
- 52. Re: Body Work - Welding (score: 1)
- Author: tld6008@mchsi.com
- Date: Thu, 12 Jan 2006 19:22:33 +0000
- Whatever method you use get plenty of test material to practice on. Making butt welds on 18 or 20 gauge sheet is not easy. The fitup clamps shown in another reply would deffinately help. -- Tim Davis
- /html/healeys/2006-01/msg00476.html (8,133 bytes)
- 53. Re: [Healeys] FW: Distributor Lube Thingy - DM6A (score: 1)
- Author: tld6008@mchsi.com
- Date: Fri, 19 Oct 2007 16:44:12 +0000
- I've no dog in this hunt, but I do have Norman's Tech Article book and have been to his shop, I went there just to see it during a trip to CA. He is a valuable source of information from common to ob
- /html/healeys/2007-10/msg00442.html (10,815 bytes)
- 54. [Healeys] SU carb rebuilders (score: 1)
- Author: tld6008@mchsi.com
- Date: Thu, 29 Nov 2007 22:45:13 +0000
- Anyone had experience with Island Automotion LTD? -- Tim Davis BN7 _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net http://autox
- /html/healeys/2007-11/msg00574.html (6,511 bytes)
- 55. Re: [Healeys] SU carb rebuilders (score: 1)
- Author: tld6008@mchsi.com
- Date: Sat, 01 Dec 2007 15:36:29 +0000
- He's in British Columbia. -- Tim Davis BN7 _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net http://autox.team.net/mailman/listin
- /html/healeys/2007-12/msg00006.html (8,071 bytes)
- 56. [Healeys] BN7 battery (score: 1)
- Author: tld6008@mchsi.com
- Date: Sat, 15 Dec 2007 08:12:53 +0000
- I am only left with the horz. supports the batteries or trays used to sit on and plan to use one 12v unit. What is the best way to secure one battery in place? I won't be judged at concours. TIA -- T
- /html/healeys/2007-12/msg00225.html (6,163 bytes)
- 57. Re: [Healeys] Shroud Welding (score: 1)
- Author: tld6008@mchsi.com
- Date: Thu, 07 Feb 2008 02:43:08 +0000
- Tig weld it Tim Davis BN7 _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net http://autox.team.net/mailman/listinfo/healeys http:/
- /html/healeys/2008-02/msg00135.html (8,077 bytes)
- 58. Re: [Healeys] Shroud Welding (score: 1)
- Author: tld6008@mchsi.com
- Date: Thu, 07 Feb 2008 02:46:31 +0000
- Tig weld it, much slower controllable process Tim Davis BN7 _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net http://autox.team.n
- /html/healeys/2008-02/msg00136.html (7,614 bytes)
- 59. Re: [Healeys] re glueing top seal (score: 1)
- Author: tld6008@mchsi.com
- Date: Sun, 25 May 2008 14:14:04 +0000
- I couldn't find a link on their website to initiate a purchase. Tim Davis BN7 _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net h
- /html/healeys/2008-05/msg00730.html (7,522 bytes)
- 60. Re: [Healeys] Wurth (score: 1)
- Author: tld6008@mchsi.com
- Date: Sun, 25 May 2008 14:37:30 +0000
- I Emailed Wurth and their answer is to call 1-800-WURTHUSA for puchases if you are not a business. -- Tim Davis BN7 _______________________________________________ Support Team.Net http://www.team.ne
- /html/healeys/2008-05/msg00731.html (7,399 bytes)
This search system is powered by
Namazu