Search String: Display: Description: Sort:

Results:

References: [ +from:steveg@abrazosdata.com: 382 ]

Total 382 documents matching your query.

261. Re: [Healeys] Pertronix (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Mon, 20 Apr 2009 07:27:22 -0800
I've fried three of them by doing the wrong things, but never had one go bad all by itself. Pertronix has replaced the first two under warranty and I haven't acted on the third yet. My first one to g
/html/healeys/2009-04/msg00553.html (7,595 bytes)

262. Re: [Healeys] Wheel Alignment (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Tue, 21 Apr 2009 09:15:08 -0800
I have pix & a drawing for an easy home-made toe-in caliper that allows one to measure one foot off the ground in front and back of the front tires. see: http://www.pbase.com/stevegerow/healey_tech -
/html/healeys/2009-04/msg00586.html (7,037 bytes)

263. Re: [Healeys] exhaust header (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Wed, 22 Apr 2009 11:12:49 -0800
Re: installing header on head studs. If necessary, you can replace some of the head studs with 1-1/4" long socket-head set screws - these can be inserted with the manifold loosely in place. This migh
/html/healeys/2009-04/msg00610.html (6,623 bytes)

264. [Healeys] spell check (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Sat, 25 Apr 2009 05:12:41 -0800
-- Steve Gerow BN6 _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net http://autox.team.net/mailman/listinfo/healeys http://www.t
/html/healeys/2009-04/msg00674.html (6,298 bytes)

265. Re: [Healeys] Pertronix III (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Sun, 26 Apr 2009 09:36:34 -0800
"After rechecking everything, she started right up so I drove downtown and she died again." Peter Roses and I spent a year on and off dealing with a similar problem on a friend's BN2 - it turned out
/html/healeys/2009-04/msg00699.html (7,309 bytes)

266. Re: [Healeys] Front end shake - an anecdote (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Sun, 26 Apr 2009 15:00:26 -0800
My car had a front end shake a couple of years ago similar to that described here, as well as, I think, the dreaded cowl shake at around 70mph. It turned out to be front end bushings. IMHO the easies
/html/healeys/2009-04/msg00711.html (7,821 bytes)

267. Re: [Healeys] (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Thu, 30 Apr 2009 06:58:16 -0800
On LHD cars, this would be the driver's side. -- Steve Gerow Pasadena, CA USA BN6, LHD _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.
/html/healeys/2009-04/msg00819.html (6,904 bytes)

268. Re: [Healeys] "Koni" front conversion (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Wed, 06 May 2009 14:59:11 -0800
just looking for any specs or a part # on the shocks. have the adapters, but no shocks.bilsteins are great just too expensive. Ira Ira - suggest getting Spax from British Parts Northwest somewhere in
/html/healeys/2009-05/msg00130.html (7,018 bytes)

269. Re: [Healeys] two seaters (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Sun, 10 May 2009 06:43:44 -0800
'59 BN6 3725 -- Steve Gerow Pasadena CA _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net http://autox.team.net/mailman/listinfo/
/html/healeys/2009-05/msg00229.html (6,884 bytes)

270. Re: [Healeys] Healey Exhaust Manifold Fasteners (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Wed, 13 May 2009 04:21:36 -0800
When I had a stock setup, I used Grade-8 lockwashers with SS nuts and they didn't loosen. Regarding the previous comment about double nuts - there are thinner Jam Nuts available for just this purpose
/html/healeys/2009-05/msg00292.html (7,145 bytes)

271. Re: [Healeys] Front Shock Thread options (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Wed, 13 May 2009 04:29:59 -0800
My car has 3 @ 10mm bolts installed in place of the orig 3/8" bolts holding one of the shocks in place. They've been there since I acquired the car in 1999 and hold just fine. Some folks go to a 3/8"
/html/healeys/2009-05/msg00293.html (7,452 bytes)

272. Re: [Healeys] (score: 1)
Author: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Sun, 17 May 2009 07:34:03 -0800
Lin, The ace tuners at APT... http://www.aptfast.com/index.htm ...suggest this method: Remove the domes and, using a dial caliper, measure the jet depression in both carbs between the bridge and how
/html/healeys/2009-05/msg00381.html (7,601 bytes)

273. Re: [Healeys] Stripped Nut on the Shock Mount (score: 1)
Author: "Steve Gerow" <steveg@abrazosdata.com>
Date: Wed, 27 May 2009 12:48:37 -0700
There's a lot of discussion in the archives on this. From your description, am assuming captive nut is still attached but threads are stripped. If nut is loose skip directly to 3) or 4) Short versio
/html/healeys/2009-05/msg00682.html (8,362 bytes)

274. [Healeys] Alternator side cover sought (score: 1)
Author: "Steve Gerow" <steveg@abrazosdata.com>
Date: Mon, 1 Jun 2009 08:02:49 -0700
Does anyone have pictures of an alternative alternator side cover, such as Welch or AHSpares? None of their sites have pix. I have the Hendrix/Lenshow kit but my stock side cover has been repaired by
/html/healeys/2009-06/msg00005.html (6,553 bytes)

275. Re: [Healeys] Stalling Problem (score: 1)
Author: "Steve Gerow" <steveg@abrazosdata.com>
Date: Fri, 5 Jun 2009 06:54:02 -0700
Concur with Rod Shepherd - Peter Roses fixed Sarah Frost's 100M the same problem by disconnecting black & white wire at coil - turned out there was heat-related defect in the battery disconnect switc
/html/healeys/2009-06/msg00122.html (7,447 bytes)

276. Re: [Healeys] Squealing Brakes (score: 1)
Author: "Steve Gerow" <steveg@abrazosdata.com>
Date: Thu, 2 Jul 2009 10:46:25 -0700
"Brake squeal is simply a high frequency vibration of the pad against the piston. If this can be interrupted by a shim (usually but not always works). Any sort of grease or other substance between t
/html/healeys/2009-07/msg00044.html (7,751 bytes)

277. Re: [Healeys] Packing Front wheel bearings (score: 1)
Author: "Steve Gerow" <steveg@abrazosdata.com>
Date: Wed, 8 Jul 2009 10:23:28 -0700
I see Harbor freight has a bearing packer, pn 97489-1RGH for $3.99 These allow you to use a grease gun to pack the wheel bearing - as long as the gun has the right type of grease in it. -- Steve Gero
/html/healeys/2009-07/msg00185.html (7,420 bytes)

278. [Healeys] Denso Alternator Article (score: 1)
Author: "Steve Gerow" <steveg@abrazosdata.com>
Date: Sat, 18 Jul 2009 09:06:20 -0700
John Sims at the Healey6 site has posted my article on using the Hendrix-Lenschow mounting kit with the smaller Denso Mini-Chevy alternator: http://www.healey6.com/Technical/Alternator1.pdf Thanks, J
/html/healeys/2009-07/msg00437.html (6,930 bytes)

279. Re: [Healeys] Walter Cronkite (score: 1)
Author: "Steve Gerow" <steveg@abrazosdata.com>
Date: Mon, 20 Jul 2009 06:45:57 -0700
I remember the half-hour "Twentieth Century" program from which this was excerpted - "Sports Cars: The Rage to Race" It was pretty cool back in the day. Didn't realize Cronkite had done a lot of endu
/html/healeys/2009-07/msg00499.html (7,386 bytes)

280. [Healeys] Glamour Healey Picture (score: 1)
Author: "Steve Gerow" <steveg@abrazosdata.com>
Date: Wed, 22 Jul 2009 12:03:43 -0700
Famed architectural photographer, Julius Shulman, who died recently at 98 took this great picture of a pre-Disneyland gas station in Anaheim, CA near brand-new Disneyland. http://www.deepglamour.net/
/html/healeys/2009-07/msg00577.html (7,387 bytes)

Current List: 261 - 280
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20]
This search system is powered by Namazu