- 21. [Fot] TR4 ARP Flywheel Bolts Question (score: 1)
- Author: tr4racing at googlemail.com (Christian Marx)
- Date: Thu, 8 Jun 2017 09:37:21 +0200
- I think my engine has two secrets. First, the flywheel runs perfectly true on the crank. Second, my clutch arrangement is very light. Titanium made. I run the same stock bolts for now 17 years. I thi
- /html/fot/2017-06/msg00057.html (13,142 bytes)
- 22. [Fot] TR4 ARP Flywheel Bolts Question (score: 1)
- Author: tr4 at wi.rr.com (Steve Yott)
- Date: Mon, 05 Jun 2017 16:22:38 -0700
- Properly made and installed that would be an good solution. Issue is that if they are not sized properly and they should have a t-shape and be counter sunk they can cause even worse failure. The righ
- /html/fot/2017-06/msg00144.html (14,377 bytes)
- 23. [Fot] TR4 ARP Flywheel Bolts Question (score: 1)
- Author: yellow04 at tr4racer.com (Yellow04)
- Date: Thu, 22 Jun 2017 07:34:30 -0400
- This has worked for me for years. Had a Moldex made with 8 bolt holes, no dowels. I use one of those lightweight steel flywheels we had made up about 15 years ago with grade 8 fasteners, no washers a
- /html/fot/2017-06/msg00146.html (10,089 bytes)
- 24. [Fot] TR4 ARP Flywheel Bolts Question (score: 1)
- Author: tr4racing at googlemail.com (Christian Marx)
- Date: Thu, 22 Jun 2017 14:18:16 +0200
- My thought is that a dowel pin has no other function than matching the parts together. The pin is not a press fit in most cases. This means, if the dowel pin get rotational forces, then all is too la
- /html/fot/2017-06/msg00148.html (14,968 bytes)
- 25. [Fot] TR4 ARP Flywheel Bolts Question (score: 1)
- Author: Spitfire_Racing at twcny.rr.com (Spitfire Racing)
- Date: Thu, 22 Jun 2017 10:16:54 -0400
- Likewise as Henry mentions, I use eight oversize grade 8 custom cut bolts with hardened flat washers and no dowels. I use Locktite blue on cleaned threads and yes it's a Moldex with a Tilton aluminum
- /html/fot/2017-06/msg00149.html (11,196 bytes)
- 26. [Fot] TR4 ARP Flywheel Bolts Question (score: 1)
- Author: johnstydo at gmail.com (John Styduhar)
- Date: Thu, 22 Jun 2017 15:01:46 -0400
- ?What would be the best approach to drilling a second dowel hole in the flywheel? Should you index to the second hole in the stock TR3/4 crank? On Mon, Jun 5, 2017 at 6:22 PM, Steve Yott via Fot <fot
- /html/fot/2017-06/msg00150.html (17,662 bytes)
- 27. [Fot] TR4 ARP Flywheel Bolts Question (score: 1)
- Author: fubog1 at aol.com (fubog1)
- Date: Mon, 26 Jun 2017 14:41:22 -0400
- I use old crank flange as a jig. Glen ?What would be the best approach to drilling a second dowel hole in the flywheel? Should you index to the second hole in the stock TR3/4 crank? On Mon, Jun 5, 20
- /html/fot/2017-06/msg00198.html (13,928 bytes)
This search system is powered by
Namazu