Mail Archive Search: <+from:waynomor@aol.com>

Results:

References: [ +from:waynomor@aol.com: 14 ]

Total 14 documents matching your query.

1. 2000 engine (score: 1): Author: waynomor@aol.com; Date: Sun, 12 Feb 2006 01:48:56 -0500; I am looking for a complete engine in running condition. Might take 5 speed if it is also okay. Not reall interested in the whole car but if enginge and tranny are good but car is shot might take it; /html/datsun-roadsters/2006-02/msg00111.html (6,376 bytes)
2. rotors spl311 (score: 1): Author: waynomor@aol.com; Date: Wed, 04 May 2005 22:31:30 -0400; I need new rotors for SPL 311... I will consider GOOD used ones if they measure sufficiently thick. Wayne; /html/datsun-roadsters/2005-05/msg00114.html (6,180 bytes)
3. Re: Bleeding Brakes after complete overhaul (score: 1): Author: WAYNOMOR@aol.com; Date: Sun, 29 Aug 2004 22:54:23 EDT; Be patient and just let it drip in the right rear first, then left reaf then front right, then left front. No need to pump -- gravity will do it if you are patient. Keep the resrvoir pretty full.i us; /html/datsun-roadsters/2004-08/msg00530.html (7,265 bytes)
4. Re: Won't start, dry? (score: 1): Author: WAYNOMOR@aol.com; Date: Mon, 12 Apr 2004 20:30:02 EDT; Check to be sure you have fuel in gas tank! Probably just lots of air in hoses. Pull one close to carb and see if you have fuel being pumped to it. Be careful not to let much fuel run out and be sure; /html/datsun-roadsters/2004-04/msg00192.html (7,044 bytes)
5. Re: To tow, or trailer? (score: 1): Author: WAYNOMOR@aol.com; Date: Mon, 12 Apr 2004 20:32:26 EDT; Get a trailer and trailer it BUT you need to have trailer brakes as trailer plus car will be heavy. In my opinion, towing is never good for cars.; /html/datsun-roadsters/2004-04/msg00193.html (7,771 bytes)
6. lower radiator (score: 1): Author: WAYNOMOR@aol.com; Date: Mon, 12 Apr 2004 20:35:21 EDT; Where can I get lower radiator hose for 68 1600 Fairlady. Is there a brand/part number I can use at a local parts store and get a hose that will work?; /html/datsun-roadsters/2004-04/msg00194.html (6,284 bytes)
7. running (score: 1): Author: WAYNOMOR@aol.com; Date: Wed, 3 Mar 2004 09:20:05 EST; My GP is now running. Just need to adjust timing etc. Do a couple of autoX's to get everything set and broken in. Final problem solved was floats sticking in carbs. Also, need to adjust toe.. Thanks; /html/datsun-roadsters/2004-03/msg00019.html (6,644 bytes)
8. water pump pain (score: 1): Author: WAYNOMOR@aol.com; Date: Wed, 11 Feb 2004 16:51:48 -0500; I have removed a dual pulley water pump. I want to install a punp with a single pulley that I have but cannot get the pulley on pump to line up with crank pulley. I have the spacer between the pump a; /html/datsun-roadsters/2004-02/msg00132.html (7,007 bytes)
9. water pump no pain (score: 1): Author: WAYNOMOR@aol.com; Date: Thu, 12 Feb 2004 12:37:56 -0500; Thanks for the replies. Dan at Rallye was a lot of help. I am getting a couple of parts and hope to have engine in car and running this weekend. This was a little thing I was stumped on. Later with m; /html/datsun-roadsters/2004-02/msg00145.html (6,345 bytes)
10. more help (score: 1): Author: WAYNOMOR@aol.com; Date: Sat, 21 Feb 2004 17:56:27 EST; I have engine # R119602. I replaced engine # R56781 with #R119602. I have had several problems but now only a couple. Oil Gallery Plugs-- The plug for oil gallery at front of engine was missing from; /html/datsun-roadsters/2004-02/msg00268.html (7,401 bytes)
11. thanks (score: 1): Author: WAYNOMOR@aol.com; Date: Sun, 22 Feb 2004 20:28:19 EST; Thanks for suggestions. I had another block and found plugs etc that fit so now know the sizes etc. I will try the penetrating oil on the temp sensor...and give it a few days to work. I did not under; /html/datsun-roadsters/2004-02/msg00280.html (6,516 bytes)
12. carb insulator block? (score: 1): Author: WAYNOMOR@aol.com; Date: Tue, 7 Oct 2003 22:18:12 EDT; I have a 1600 Roadster. The flexible rubber carb insulator block from cars to intake manifold (I think that is what it is called) has a small surface crack. I do not want to run engine too much becau; /html/datsun-roadsters/2003-10/msg00094.html (6,974 bytes)
13. insulator block more (score: 1): Author: WAYNOMOR@aol.com; Date: Tue, 7 Oct 2003 22:30:45 EDT; In my Nissan parts catalog (December 1970) for 1600 figure F5-2 shows the insulator and stud. The stud is part number 0?214-54510 The ? is because I cannot read the number in my copy. Is it 00214-545; /html/datsun-roadsters/2003-10/msg00095.html (6,384 bytes)
14. 5 speed (score: 1): Author: waynomor@aol.com; Date: Sun, 29 Apr 2007 13:58:52 -0400; I have lost 1st and second gears in 5 speed. Nothing happens when I move shifter. No noise no resistence. Ideas? 3rd,4th, 5th work and reverse. I have another 5 speed with broken first gear shift for; /html/datsun-roadsters/2007-04/msg00022.html (6,990 bytes)

Current List: 1 - 14
Page: [1]