- 61. Rear wheel bearings (kinda long but hang in there) (score: 1)
- Author: KWS711@aol.com
- Date: Sat, 1 Jul 2000 02:19:57 EDT
- Had a noise in the right rear the other morning. Parked it and noticed fluids on the inside of the wheel and tire. Pulled the axle out and all the grease had come out of the bearing. The day before,
- /html/datsun-roadsters/2000-07/msg00000.html (7,737 bytes)
- 62. Wheels (score: 1)
- Author: KWS711@aol.com
- Date: Sat, 1 Jul 2000 16:08:46 EDT
- I have a set of American mags, dish type, with five ovals around the outer part of the wheel. They are 14x7. Cast into the inner wheel is 8002E 14X7. One of the center caps is missing. If anyone is i
- /html/datsun-roadsters/2000-07/msg00005.html (6,493 bytes)
- 63. Wheels (score: 1)
- Author: KWS711@aol.com
- Date: Sun, 2 Jul 2000 02:17:56 EDT
- I wanted the thank all who reponded to the wheels I have. Man, I wish I had The first person to respond was Kerry Zariwny. If for some reason it doesn't happen I will let you know. Thanks, Kim 68 200
- /html/datsun-roadsters/2000-07/msg00025.html (6,403 bytes)
- 64. Re: Backfire (score: 1)
- Author: KWS711@aol.com
- Date: Sun, 2 Jul 2000 02:43:15 EDT
- I used to make my 60 Chevy backfire at will. Go flying by another car, pedestrian, etc., turn off the ignition, coast for a bit, (usually too long) turn the ignition back on and BAM, major backfire.
- /html/datsun-roadsters/2000-07/msg00027.html (6,524 bytes)
- 65. Pertronix (score: 1)
- Author: KWS711@aol.com
- Date: Tue, 4 Jul 2000 21:59:50 EDT
- Trying to install my Pertronix Ignitor, and have a few questions. Has anyone run this with an MSD ignition? The instructions say to run the red wire to the positive side of the coil. With the MSD, th
- /html/datsun-roadsters/2000-07/msg00106.html (7,232 bytes)
- 66. Re: Datsun decals II (score: 1)
- Author: KWS711@aol.com
- Date: Thu, 6 Jul 2000 01:09:55 EDT
- I also have recently received some stickers. These were made by Mark Dent. They are for the center caps on my Libras. They are very high quality and the price was right!! Check them out at Shasta. Th
- /html/datsun-roadsters/2000-07/msg00150.html (6,375 bytes)
- 67. Shasta (score: 1)
- Author: KWS711@aol.com
- Date: Fri, 7 Jul 2000 02:19:02 EDT
- Hitting the rack, up at crack of dawn to hit the road going south!! Shasta, here I come!!!! Kim 68 2000 CSP NOWROC
- /html/datsun-roadsters/2000-07/msg00188.html (7,415 bytes)
- 68. Re: New Wheel Mystery (score: 1)
- Author: KWS711@aol.com
- Date: Sat, 15 Jul 2000 22:09:58 EDT
- I have similar wheels I bought on the Internet. They are made by American. They were rough when I got them, but I got them soda blasted (lees harsh than sand or beads), painted the spokes with gray
- /html/datsun-roadsters/2000-07/msg00521.html (7,469 bytes)
- 69. Shasta T-Shirts (score: 1)
- Author: KWS711@aol.com
- Date: Mon, 17 Jul 2000 21:56:27 EDT
- The T-shirts at Shasta this year sold out very quickly. I contacted Phyllis, inquiring if we could get more made up. She said she would have to get commitments for at least 20-25. I deleted her e mai
- /html/datsun-roadsters/2000-07/msg00585.html (6,613 bytes)
- 70. Re: Confessions Of A Reformed High Windshield Hater (score: 1)
- Author: KWS711@aol.com
- Date: Thu, 20 Jul 2000 23:49:40 EDT
- If your not satisfied with the console cover, you should contact the vender and arrange to return it. If it's not correct, they should take it back. Don't put up with something that's driving you nu
- /html/datsun-roadsters/2000-07/msg00713.html (6,930 bytes)
- 71. Re: Roadster sighting on film (score: 1)
- Author: KWS711@aol.com
- Date: Sat, 22 Jul 2000 21:09:55 EDT
- Congratulations Sid!! Another future roadster driver. Kim 68 2000 CSP NOWROC
- /html/datsun-roadsters/2000-07/msg00754.html (7,494 bytes)
- 72. NOWROC Run (score: 1)
- Author: KWS711@aol.com
- Date: Tue, 25 Jul 2000 00:27:13 EDT
- On the NOWROC website under events, there is a tentative run in the Columbia Gorge on July 30th. Is this happening? Please advise. Kim 68 2000 CSP NOWROC
- /html/datsun-roadsters/2000-07/msg00817.html (6,174 bytes)
- 73. Re: 68-2000 Dimensions? (score: 1)
- Author: KWS711@aol.com
- Date: Tue, 25 Jul 2000 21:06:45 EDT
- Length=155.7"=12.98' Width=58.9"=4.91' I have a 16x6 dual axle trailer which I like very much. The extra length allows you to put a tool box or tire rack on the front and still have plenty of room.
- /html/datsun-roadsters/2000-07/msg00869.html (6,544 bytes)
- 74. Columbia Gorge Run (score: 1)
- Author: KWS711@aol.com
- Date: Mon, 31 Jul 2000 00:47:50 EDT
- What a great day!! Eleven roadsters and Mark's Z all the way from Eugene!! Was rather hot, best bet was to keep moving. Thanks to Jon Wissler for getting us all together. A great run up the mountain
- /html/datsun-roadsters/2000-07/msg01122.html (6,884 bytes)
- 75. Charging problems (score: 1)
- Author: KWS711@aol.com
- Date: Thu, 1 Jun 2000 23:59:46 EDT
- Started having problems last week. Went out for a drive, during which the battery stopped charging. Figured I'd put in a new alternator and voltage regulator (they weren't that expensive). Jumped the
- /html/datsun-roadsters/2000-06/msg00070.html (6,983 bytes)
- 76. Re: Charging problems (score: 1)
- Author: KWS711@aol.com
- Date: Fri, 2 Jun 2000 11:01:38 EDT
- I need to add a little info . A while back, I was out driving and when I went to start up after a short stop, the car was dead. Wouldn't start, nothing except the hord worked. Got a lot of advice say
- /html/datsun-roadsters/2000-06/msg00083.html (7,395 bytes)
- 77. Re: foam (score: 1)
- Author: KWS711@aol.com
- Date: Thu, 8 Jun 2000 00:03:06 EDT
- I like it!! The trunks not big enough to be worth much anyway!! Kim 68 2000 CSP NOWROC
- /html/datsun-roadsters/2000-06/msg00273.html (6,651 bytes)
- 78. Nameplates (score: 1)
- Author: KWS711@aol.com
- Date: Mon, 12 Jun 2000 21:59:44 EDT
- It is my understanding that at one time, blank nameplate were available for cars that received the dealer installed Solex option. Are any of these still available? Mine is missing and I have a Calif.
- /html/datsun-roadsters/2000-06/msg00508.html (6,351 bytes)
- 79. Re: Re[2]: rechrome question (score: 1)
- Author: KWS711@aol.com
- Date: Mon, 12 Jun 2000 22:03:02 EDT
- It cost me $500 to have both bumpers, both headlight surrounds and the truck handle done by The Chrome Shop in Portland, OR. I think a lot has to do with the condition, preperation of the parts. Kim
- /html/datsun-roadsters/2000-06/msg00509.html (7,632 bytes)
- 80. Motor #'s (score: 1)
- Author: KWS711@aol.com
- Date: Thu, 15 Jun 2000 00:17:41 EDT
- I'm trying to find out if the motor in my 2000 is original. If you have a U20 and your serial # is close to 5015, would you please let me know what your engine # is. Mine is 06401, and I have a spare
- /html/datsun-roadsters/2000-06/msg00586.html (6,292 bytes)
This search system is powered by
Namazu