- 1. [6pack] speedo opinions (score: 1)
- Author: Jim Jones <jimjcmo@yahoo.com>
- Date: Mon, 3 Mar 2008 15:45:32 -0800 (PST)
- My speedometer is making a lot of noise (RMM-RMM-RMM) and the needle bounces around a 180 degree arc. I've lubed the cable so it turns freely. It was new one year ago. When I test the speedo using my
- /html/6pack/2008-03/msg00040.html (7,228 bytes)
- 2. Re: [6pack] speedo opinions (score: 1)
- Author: "Navarrette, Vance" <vance.navarrette@intel.com>
- Date: Mon, 3 Mar 2008 16:18:37 -0800
- I am confused. You said it is your speedo that is making the noise, but you tested the cable by turning the end on the dizzy? So, if it is the speedo, you tested the dizzy cable instead. You need to
- /html/6pack/2008-03/msg00042.html (8,449 bytes)
- 3. Re: [6pack] speedo opinions (score: 1)
- Author: lfm614@aol.com
- Date: Tue, 4 Mar 2008 00:19:16 +0000
- Have you checked the fit of the cable into the square drive in the speedo for looseness and the proper engagement length? Sometimes the cable doesn't go in all the way and spins in the drive reciever
- /html/6pack/2008-03/msg00043.html (8,122 bytes)
- 4. Re: [6pack] speedo opinions (score: 1)
- Author: tr6taylor@webtv.net (Sally or Dick Taylor)
- Date: Mon, 3 Mar 2008 17:27:25 -0800
- Jim--Your hand drill needs to be capable of matching the speed of the instrument in question, when it hums. (Is it the speedo or the "dizzy")? Be sure to have the same angle of cable turns in play wh
- /html/6pack/2008-03/msg00045.html (7,861 bytes)
- 5. Re: [6pack] speedo opinions (score: 1)
- Author: Peter Chalk <chalkp@internode.on.net>
- Date: Tue, 04 Mar 2008 16:15:13 +1030
- Ive had issues here too with my 2500 - not my '6 tho.. doesn't do enough km Some noise, but v. jumpy speedo needle.. Firstly went thru the tasks of re-greasing the cable path all along the cable shea
- /html/6pack/2008-03/msg00050.html (8,391 bytes)
This search system is powered by
Namazu