vintage-race
[Top] [All Lists]

Re: [Vintage-race] Aluminum Hubs...

To: "Eric J Russell" <ejrussell@mebtel.net>,
Subject: Re: [Vintage-race] Aluminum Hubs...
From: "Stewart Smith" <56887@msn.com>
Date: Sat, 23 Jan 2010 12:22:15 -0800
Aluminum aircraft bolts, aluminum radiator ( in period a Fiat radiator, some 
claim the new aluminum radiators carry more water negating any weight 
savings), all un-necessary wiring (brake light, ignition circuit), headlight 
bulbs, aluminum wire wheel rims, billet aluminum driveshaft, magnesium 
trans.......SCCA allowed 940 lbs for BMC sevens and I don't think anyone 
could get that light. I know the 1340's were closer in minimum weight than 
the BMC's for some reason. The BMC transmission is lighter, but the engine 
heavier.

S

--------------------------------------------------
From: "Eric J Russell" <ejrussell@mebtel.net>
Sent: Saturday, January 23, 2010 11:41 AM
To: <vintage-race@autox.team.net>
Subject: Re: [Vintage-race] Aluminum Hubs...

> South Beach Diet?
>
> Eric Russell
> Mebane, NC
> http://home.mebtel.net/~ejrussell
> ----- Original Message ----- 
> From: <vintage-race-request@autox.team.net>
>
>> what else is available to lighten a Sprite powered Seven? There's not 
>> much left to strip off it!
>>
>> Thanks, John D.
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as 56887@msn.com
>
> Vintage-race@autox.team.net
> http://autox.team.net/mailman/listinfo/vintage-race
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Vintage-race@autox.team.net
http://autox.team.net/mailman/listinfo/vintage-race

<Prev in Thread] Current Thread [Next in Thread>