vintage-race
[Top] [All Lists]

Fwd: Sources for drilled metric hex/allen bolts

To: vintage-race@autox.team.net
Subject: Fwd: Sources for drilled metric hex/allen bolts
From: KLynch7589@aol.com
Date: Mon, 12 Apr 2004 22:00:20 EDT
In a message dated 4/12/2004 10:51:46 AM Mountain Standard Time, 
hottr6@hotmail.com writes:


> Hi All,
> 
> Does anyone have a good source for drilled metric hex/allen bolts?
> 
> I usually use either McMaster-Carr, Pegasus or Aircraft Spruce for
> picking up drilled AN or Grade 8 fasteners, but none stock drilled
> metric fasteners (grade 10.9 or better).
> 
> I've got too many to drill, so it is actually cheaper just to buy them.
> 
> FWIW, this is for my Guzzi Le Mans.
> 
> Shane Ingate "no metrication in my Triumph" in Maryland
> 
> 


Be an organ donor!
Return-Path: <owner-fot@autox.team.net>
Received: from  rly-xk05.mx.aol.com (rly-xk05.mail.aol.com
  [172.20.83.42]) by air-xk03.mail.aol.com (v98.19) with ESMTP id
  MAILINXK31-597407ac907237; Mon, 12 Apr 2004 12:51:45 -0500
Received: from  autox.team.net (autox.team.net [66.219.202.130]) by
  rly-xk05.mx.aol.com (v98.5) with ESMTP id
  MAILRELAYINXK51-597407ac907237; Mon, 12 Apr 2004 12:51:26 -0400
Received: (from majordom@localhost) by autox.team.net (8.12.5/8.12.5) id
  i3CGq6of015546 for fot-outbound; Mon, 12 Apr 2004 10:52:06 -0600
X-Originating-IP: [192.35.78.29]
X-Originating-Email: [hottr6@hotmail.com]
X-Sender: hottr6@hotmail.com
From: "SHANE Ingate" <hottr6@hotmail.com>
To: fot@autox.team.net
Subject: Sources for drilled metric hex/allen bolts
Date: Mon, 12 Apr 2004 12:50:02 -0400
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <BAY12-F30e3Xw1lZf6M0003da44@hotmail.com>
X-OriginalArrivalTime: 12 Apr 2004 16:50:02.0542 (UTC)
  FILETIME=[33028CE0:01C420AE]
Sender: owner-fot@autox.team.net
Precedence: bulk
Reply-To: "SHANE Ingate" <hottr6@hotmail.com>
X-AOL-IP: 66.219.202.130
X-Mailer: Unknown (No Version)

Hi All,

Does anyone have a good source for drilled metric hex/allen bolts?

I usually use either McMaster-Carr, Pegasus or Aircraft Spruce for
picking up drilled AN or Grade 8 fasteners, but none stock drilled
metric fasteners (grade 10.9 or better).

I've got too many to drill, so it is actually cheaper just to buy them.

FWIW, this is for my Guzzi Le Mans.

Shane Ingate "no metrication in my Triumph" in Maryland

_________________________________________________________________
Check out MSN PC Safety & Security to help ensure your PC is protected and 
safe. http://specials.msn.com/msn/security.asp





<Prev in Thread] Current Thread [Next in Thread>
  • Fwd: Sources for drilled metric hex/allen bolts, KLynch7589 <=