I'm getting good results with the Ultra-Copper spray on head gaskets.
I have heard of the Aluminum paint trick.
lwdent wrote:
>
> Bill, a very good discussion of sealers, and with your permission, I
> would like to post it on my 356 Porsche talk line.
>
> One other addition, or comment if you will,
>
> I too have built many engines over the years, both racing and auto/truck
> when I owned Fort Wayne Crankshaft Service, and I was taught early to
> spray head gaskets with aluminum spray can paint on both sides before
> installation, allow to tack up a bit, then install and torque in the
> recommended manner and to the recommended torque's.
|