In a message dated 5/22/99 11:57:12 AM Eastern Daylight Time,
rebjrmd@ix.netcom.com writes:
<< Being an enthusiastic
amateur and not a mechanical engineer, it seems to me that it might
work, but would sure work better if the flywheel was beveled on the
engine side i.e. the side from which the SuperStarter engages. Does
anybody have any suggestions or advice? >>
Just put the Isuzu starter on and don't worry about the beveled teeth. It
will work fine. The only thing to be concerned about is whether the solenoid
position is a problem. There are two different starters with slightly
different solenoid orientations. One or the other should work. We have one on
our 105E powered FJ.
Jack Woehrle
|