vintage-race
[Top] [All Lists]

Re: torque plate

To: vintage-race@Autox.Team.Net, dwilson@america.net (DOUG WILSON)
Subject: Re: torque plate
From: "Dunst, Mordecai" <mdunst@smtplink.Coh.ORG>
Date: Fri, 27 Jun 97 15:31:20 pst
     I can most likely make this out of Aluminum plate about one 
     inch thick.
     
     Mordy Dunst
     www.headgasket.com


______________________________ Reply Separator _________________________________
Subject: torque plate
Author:  dwilson@america.net (DOUG WILSON) at INTERNET
Date:    6/27/97 12:29 PM


I need a torque plate (sometime called a deck plate) for boring a 
sprite/midget motor. Does any know who makes these?
     
Doug Wilson
59 Sebring Sprite(almost)
     
     

<Prev in Thread] Current Thread [Next in Thread>
  • torque plate, DOUG WILSON
    • Re: torque plate, Dunst, Mordecai <=