| To: | "TVR Bill Yasui" <w.yasui@utoronto.ca>, |
|---|---|
| Subject: | Fitting Rad to 2500M |
| From: | "Pat Leask" <pleask@telus.net> |
| Date: | Thu, 27 Sep 2001 20:45:51 -0700 |
Like most, I'm fitting a big rad to my 2500M and took out that rad made for Mini's ! Yes, it is laid back on an angle and all that. My question is, the top most part of the rad is 1" higher than the level of the inner fenders at the same point. (Straight edge from one side to the other). I don't have the hood to fit or to see if it bulges. Is this okay or will the hood hit it ? Thanks, Pat /// /// tvr@autox.team.net mailing list /// |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | RE: Ballast Resister, Hill, Stephen M EDUC:EX |
|---|---|
| Next by Date: | Fitting Rad to 2500M, Richard Feibusch |
| Previous by Thread: | At last, my web site is built !, Pat Leask |
| Next by Thread: | Fitting Rad to 2500M, Richard Feibusch |
| Indexes: | [Date] [Thread] [Top] [All Lists] |