Replacing the wood is very simple. I assume that you have the inner door
panel off. remove the four screws that hold the crank assembly to the door.
( crank the glass up before you do this) I also use a clamp to hold the
glass up. remove the wood and replace it with a good piece of marine plywood
with several coats of urethane.
Rolf Beuttenmuller
LVX1698/4
-----Original Message-----
From: owner-tvr@autox.team.net [mailto:owner-tvr@autox.team.net]On
Behalf Of Pat
Sent: Saturday, July 07, 2001 2:17 AM
To: TVRLIST
Subject: Wood in 2500M doors
I have to replacet he wood behind the window wind up lever.
How do I go about doing this please ?
(Please tell me I can do it with out removing the guts of the door ! )
Thanks, Pat
PS: I'm a new TVR owner, but also have a TR3 and a Mini.
///
/// tvr@autox.team.net mailing list
///
|