Rich, I have a couple of TR6 half shafts, which look identical to the TVR
halfshaft. The exception seems to be that the TVR half shafts have round
flanges which bolt to the diff output flanges, and the same round flange on
the outboard end of the half shaft which bolts to the inboard end of the
outer axles. The TR6 halfshafts have a different mating arrangement on the
outboard end of the half shaft, but it looks like you can swap the TVR piece
with the TR6 piece. Sorry, this could be clearer, but get back to me if you
need clarification.
Stephen
1972 TVR
[This message delayed, as it needed manual intervention by the list
administrator. mjb.]
///
/// tvr@autox.team.net mailing list
///
|