--===============3389063698526297605==
--00000000000046d616060450de68
Content-Transfer-Encoding: quoted-printable
Moss and most of the other suppliers sell a tool that is supposed to help
make the job a bit easier. If you search on =E2=80=9Cwindshield weatherstri=
p
beading tool=E2=80=9D you should find it. I cludged together something simi=
lar from
bits I had laying around in the shop when I did mine. It was a fiddly job,
but with patience, it goes in. As I recall, a bit of soapy water helped.
Good luck!
Mike
On Fri, Sep 1, 2023 at 12:17 PM Tom Fansher <tfansher@comcast.net> wrote:
> Ok helping a buddy. The windshield is installed and now for the chromed
> plastic finisher. It doesn=E2=80=99t want to =E2=80=9Cslip=E2=80=9D into =
the groove in the black
> rubber glazing. The groove is REALLY tight. Any suggestions from TR4, 250
> or Tr6 guys? Stuff cord into the groove and apply heat?
> TIA
> Tom Fansher
> 61 TR3
> 62 TR4
>
> Sent from my iPhone
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/salty1249y@gmail.com
>
--00000000000046d616060450de68
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">Moss and most of the other suppliers sell a tool that is =
supposed to help make the job a bit easier. If you search on =E2=80=9Cwinds=
hield weatherstrip beading tool=E2=80=9D you should find it. I cludged toge=
ther something similar from bits I had laying around in the shop when I did=
mine. It was a fiddly job, but with patience, it goes in.=C2=A0 As I recal=
l, a bit of soapy water helped.=C2=A0</div><div dir=3D"auto"><br></div><div=
dir=3D"auto">Good luck!</div><div dir=3D"auto">Mike</div><div dir=3D"auto"=
><br></div><div><br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gm=
ail_attr">On Fri, Sep 1, 2023 at 12:17 PM Tom Fansher <<a href=3D"mailto=
:tfansher@comcast.net">tfansher@comcast.net</a>> wrote:<br></div><blockq=
uote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left-wi=
dth:1px;border-left-style:solid;padding-left:1ex;border-left-color:rgb(204,=
204,204)">Ok helping a buddy. The windshield is installed and now for the c=
hromed plastic finisher. It doesn=E2=80=99t want to =E2=80=9Cslip=E2=80=9D =
into the groove in the black rubber glazing. The groove is REALLY tight. An=
y suggestions from TR4, 250 or Tr6 guys?=C2=A0 Stuff cord into the groove a=
nd apply heat?=C2=A0 <br>
TIA<br>
Tom Fansher<br>
61 TR3<br>
62 TR4<br>
<br>
Sent from my iPhone<br>
** <a href=3D"mailto:triumphs@autox.team.net"; target=3D"_blank">triumphs@au=
tox.team.net</a> **<br>
<br>
et=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/pipermail/triumphs"; rel=3D"noreferr=
er" target=3D"_blank">http://www.team.net/pipermail/triumphs</a>=C2=A0 <a h=
ref=3D"http://www.team.net/archive"; rel=3D"noreferrer" target=3D"_blank">ht=
tp://www.team.net/archive</a><br>
<br>
hs/salty1249y@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.=
team.net/mailman/options/triumphs/salty1249y@gmail.com</a><br>
</blockquote></div></div>
--00000000000046d616060450de68--
--===============3389063698526297605==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
--===============3389063698526297605==--
|