...has nothing to do with the Pertronix, rather if you have a ballast
wire feeding your current coil installation. (no ballast 3 ohms (with
ballast 1.5 ohms)
In both cases you simply run the RED wire from the Pertronix module to a
true 12V source (not the coil+ if you have a ballast wire)
ptegler
On 12/28/2020 4:58 PM, Jim Henningsen wrote:
> Anyone know if we should be using a 1.5 ohm or 3.0 ohm flame thrower coil
> with the LU-142A pertronix ignitor? 1967 Triumph TR4A.
> Thanks,
> Jim Henningsen
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net
--
Paul Tegler
ptegler@verizon.net www.teglerizer.com
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|