On 7/22/20 7:44 AM, John Deluca wrote:
> Listers,
> In final assembly of my TR2 that was partially restored by the PO. The doors
> fit well, but the latches don�t line up with the striker plates. Both
> latches are too high to nest in the striker plate. The latch hits above the
> striker plate opening. I�ve used all the available play in both
> pieces and made slight adjustments to the doors. I�m at a dead end.
> Any suggestions will be appreciated.
> John DeLuca
Did you or the previous owner remove the body from the frame?
TeriAnn
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|