Jim,
Have you tried Ebay or Craigslist? Used to be plenty of stuff like that
in the past.
Bob
On 2/17/20 11:07 AM, Jim Henningsen wrote:
> Ordered a new enameled hood badge as the body shop had tried to bend it to
> fit the holes and cracked the enamel. The holes on my 62 TR4 hood are not
> quite matching up with the aftermarket hood badges. This one is from
> England. Any thoughts on fixing this before I experiment. Badges ae too
> expensive to try and bend the mounting tips. I am thinking I need to shave
> one of the holes on a top or bottom side to increase length between holes. I
> know this may allow badge to shift after install, but what options are
> there?
> Thanks
> Jim Henningsen
> Ocala FL
> 61 TR3A
> 62 TR4
> 75 TR6
> 81 TR8
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/yellowtr@adelphia.net
>
** triumphs@autox.team.net **
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
|