You could also try a double sided Velcro strap.
Al Salvatore
On Thu, Aug 30, 2018 at 5:35 AM David Friedlander <forzion7 at gmail.com>
wrote:
> Thanks to all who responded! Some good ideas out there!!
>
> Dave
>
>
>
> On Wed, Aug 29, 2018 at 7:33 PM TRuss <truss113 at verizon.net> wrote:
>
>> Coincidentally I was just faced with the same issue. I filled the bottle
>> in preparation for my MA inspection, just in case I needed to demo the
>> awesome power of my vintage sprayers. The humongous zip tie is just the
>> ticket. (Can?t believe I had one on hand, 36?). White like the bottle and
>> can leave it just loose enough to slide the bottle out if necessary. Thank
>> you John for the solution!
>>
>> Tim Russell.
>>
>> This email has been Sent from my iPhone.
>>
>> On Aug 29, 2018, at 5:07 PM, John Gibbs via NET <
>> net at newenglandtriumphs.org> wrote:
>>
>> Hi Dave,
>> I used a big wire tie and put it just under the rubber band so it's not
>> that notable. Works great bottle don't move at all. You could also check at
>> a craft store and see if they sell long double sided velcro strip for
>> another alternative.
>> Good luck and keep us posted
>> John
>>
>> Sent from my iPhone
>>
>> On Aug 29, 2018, at 4:46 PM, David Friedlander via NET <
>> net at newenglandtriumphs.org> wrote:
>>
>> Hey all ~
>>
>> I've got a pretty small, non-technical issue I'm hoping someone else has
>> already figured
>> out:
>>
>> Some years back, I put a new square washer bottle, bracket and strap on
>> my '74 TR6.
>> I notice that the strap (which looks like an oversized rubber band, looks
>> like it's about
>> to give way. Before that happens, I'd like to replace it: Not the bracket
>> to which it's
>> attached, just the band. It seems that Moss sells the bracket and strap
>> as an "assembly"
>> (P/N 546-140 @ $51.99) as does TRF (P/N 518265 @ $34.94). It seems
>> obvious the
>> brackets don't wear out but the rubber retaining strap does. They don't
>> seem to sell
>> the strap apart from the bracket but I'd prefer to find a strap (no, not
>> a bungee cord)
>> at a considerably lower cost than the assembly pricing. Anyone BTDT?
>>
>> Thanks in advance for any responses...
>>
>> Dave Friedlander
>> '74 TR6
>> '59 TR3a in process
>>
>> _______________________________________________
>> NET mailing list
>> NET at newenglandtriumphs.org
>> http://newenglandtriumphs.org/mailman/listinfo/net_newenglandtriumphs.org
>>
>> _______________________________________________
>> NET mailing list
>> NET at newenglandtriumphs.org
>> http://newenglandtriumphs.org/mailman/listinfo/net_newenglandtriumphs.org
>>
>>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/alansalvy at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180830/eeb751e8/attachment.html>
|