Ok, after listening to Randall I rewired up the alternator into the system.
The three connections under the hood are still clean ? But now I have wired the
?L? into the standalone connection to the ignition light. And the ?IG? to the
switch side of the ignition switch. And the output, via a 30amp fuse for
protection, to the ?main? power feed.
Hmmm, looks good,
* No red light anymore when battery connected ? good
* No red light when key on ? not good
* When running ? ammeter showing -ve. ? Not good ( Wires have been
switched for polarity. )
Attached is the original, generator based wiring and the what is now in the car
( the yellow and yellow/green from the alternator will need to be switched to
be colour consistent but can deal with that after )
What did I screw up?
David
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180827/17f77ac1/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: originalwiring.png
Type: image/png
Size: 83058 bytes
Desc: originalwiring.png
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180827/17f77ac1/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wiring.png
Type: image/png
Size: 98468 bytes
Desc: wiring.png
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180827/17f77ac1/attachment-0001.png>
|