triumphs
[Top] [All Lists]

[TR] Rattle Can Paint

Subject: [TR] Rattle Can Paint
From: bwesterdale53 at yahoo.com (Bob Westerdale)
Date: Wed, 15 Aug 2018 21:18:51 +0000 (UTC)
References: <942286EB-2C0A-4F3B-BA0D-2AA65E696208@flash.net> <1653ea1e33d-1e9f-6462@webjas-vae139.srv.aolmail.net> <69ea70ae-8f97-d582-896a-1cccbd2e02d8@tonydrews.com>
 I'd suggest a small glass jar ( w/ lid) full of 'Brush Cleaner' ...? Each time 
you empty a rattlecan,pull off the sprayhead and toss it in the sauce.? The 
residual paint stays soft and this sprayheadwill function well when the one 
you'd been using clogs up.? ? I've got a jar full of all different kindsthat 
I've collected over the years,? everything from spray glue to undercoating.? If 
the spraycandoesn't have enough pressure to force out the old but softened 
paint in the sprayhead, hit it with some?compressed air.? Works every 
time...Cautionary Note:? Most Rustoleum Spray paint has a re-coat window of 
either less than 2 hours or?more than 48 hours ( under good drying conditions)? 
?A fresh re-coat ( ie. over the 'feels dry' -but isn't-first coat)? will result 
in the paint solvents really trashing the whole project, resulting in an 
unusableywrinkled-coat, and you'll have to start all over from bare metal.? ? 
If drying conditions are sub-optimal,( ie cool weather)? you may have to wait a 
few extra days.? ?I try to spray some paint on some scrap?and use it as a 
test-case for re-coat timing....? But have also had to resort to very bad 
language andmuch furrowing of brow at times when the 2nd coat curdles after a 
few hours....I'd had pretty good luck with most of the Krylon stuff,? but the 
Rustoleum is better paint, IMHO.YMMV!!Bob Westerdale59 3A? ?TS36967
    On Wednesday, August 15, 2018, 4:33:00 PM EDT, Tony Drews <tony at 
tonydrews.com> wrote:  
 
   
"Spray at any angle" kills that method.? It's nice while painting but sucks 
afterwards.
 
- Tony
 
 
 On 8/15/2018 12:28 PM, Andrew S. Mace wrote:
  
   Do you do the usual "invert the can after you're finished and spray until 
it's clear"?
   
  --Andy Mace
 
 *Mrs Irrelevant: Oh, is it a jet?
 *Man: Well, no ... It's not so much of a jet, it's more your, er, Triumph 
Herald engine with wings.
 -- Cut-price Airlines Sketch, Monty Python's Flying Circus (22)
 
 Triumph 10 / Herald / Sports 6 vehicle consultant, The Vintage Triumph 
Register: http://www.vtr.org
 
 Check out the North American Triumph Sports 6 (Vitesse 6) and Triumph Herald 
Database: http://triumph-herald.us  
   
  -----Original Message-----
 From: Wbeech at flash.net <wbeech at flash.net>
 
 Is it just me or is there no way to clear the tip of the new Rust-Oleum, and 
maybe others, spray cans with the ?spray at any angle? feature?   
  
 ** triumphs at autox.team.net **

Archive: http://www.team.net/archive
 
 
 
** triumphs at autox.team.net **

Archive: http://www.team.net/archive
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/triumphs/attachments/20180815/1a0457ad/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>