J Type. Sorry
On Fri, Aug 10, 2018 at 1:22 PM, Randall <tr3driver at ca.rr.com> wrote:
> I'll bite, what is a Y type OD?
>
> I've tested both A and J with a drill motor on the input, but I don't try
> to use the chuck to grab the shaft. Instead, I found a short length of
> radiator hose that I could clamp to each of them. No risk of damage to the
> bearing surface on the shaft.
>
> Fairly certain it turns clockwise when you're looking at the bell housing
> towards the rear; but maybe someone else can confirm?
>
> You can try any forward gear, but the drill turns pretty slow and the OD
> will be turning even slower in any gear except 4th. That may affect the
> results, especially if it works like a J-type.
>
> -- Randall
--
Sujit Roy
Cupertino, California
https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180810/0e0f45d5/attachment.html>
|