triumphs
[Top] [All Lists]

[TR] torque wrench question

Subject: [TR] torque wrench question
From: tr3driver at ca.rr.com (Randall)
Date: Fri, 10 Aug 2018 16:26:06 -0400
References: <CANLCLaHs1mtOkE_mM_A-tYmfmW6zf1Qnj2QG5_q3ixtuJ-Bo8g@mail.gmail.com>
Depends on the angle between the crowfoot wrench and the torque wrench.

If you have it sticking out straight, then multiply the torque figure you want 
by the ratio of the torque wrench length divided by the new length. Both 
lengths measured from center of rotation to the center of the hand grip.

The formula for other angles is more complicated.
-- Randall
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/triumphs/attachments/20180810/03efdfc3/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>